At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Remove from pvc, make sure the pipe is cut square, use cutter not saw. Ensure that the pipe is fully inserted into fitting (sometimes it is difficult to fully seat). Why would you use that type fitting? How to Fix Water Leak with SharkBite Push On Fitting
you will have to get a line wrench and take out the old line. the parts store only sells straight line so you will have to bend it as close to the original as you can. be sure to buy the tool that will help bend the line without kinking it.
Important: There is no service interval for in-line fuel filter replacement. Only replace the in-line fuel filter if it is restricted.
1.
Relieve the fuel system pressure. Refer to the
2.
Raise the vehicle.
3.
Remove the fuel feed quick-connect fitting (4) at the inlet of the in-line fuel filter (3).
4.
Remove the threaded fitting at the outlet of the in-line fuel filter (3).
5.
Drain any remaining fuel into an approved gasoline container.
6.
Inspect the lines for cuts, swelling, cracks, and distortion.
Replace the lines as required.
7.
Inspect the O-ring on fuel filter outlet pipe for cracks or damage.
Replace the O-ring as required.
8.
Inspect the fuel vent pipe (2).
9.
Inspect the fuel return pipe quick connect fitting (1).
Assuming you have the RIGHT radiator, you can adapt from the nipples to a 3/8" hose fitting(brass preferably),and cut the lines to accept a hose and clamp type connection. (use good quality hose such as low pressure power steering or fuel hose.
Before I accepted this radiator,though, I'd take a look at another brand radiator or another one from a different store and be sure they gav
e you the exact fit. don-ohio
Yes your printer will send and receive faxes.
1. Make sure:
• The printer is connected to a computer that is equipped with a fax modem.
• The computer is connected to a working phone line.
• Both the printer and the computer are turned on.
2 Load an original document facedown on the scanner glass.
Here is the manual, in case you don't have one
http://www.retrevo.com/d/ds/progress?doc=7d2128cd89431b0e3d4c2a1c31fa8fc4
3 From the desktop, double-click the Imaging Studio icon.
4 Click Fax.
5 Click Scan and send a fax.
6 Click Preview Now.
7 Click and drag the dotted line box to select a specific area of the preview image to fax.
8 Adjust the settings as needed.
9 Click Next.
10 Follow the instructions on the computer screen to complete the task.
Receiving a fax using the software
1 Make sure:
• The printer is connected to a computer that is equipped with a fax modem.
• The computer is connected to a working phone line.
• Both the printer and the computer are turned on.
2 From the desktop, double-click the Imaging Studio icon.
3 Click Fax.
if you don't know how to sweat copper the best way is cut out the split,and replace with compression couplings and the rite size and length of copper. or you can use sharkbite couplings and pex pipe or copper. sharkbite is the easiest way to go,you just push them together. home depo or lowes carry both
×