Audi a4 2007 code po717 location of sensor - A4 Audi Cars & Trucks

PO722 - output speed sensor
PO717 - input speed sensor.
P0581 – Cruise control system, multi -function switch input A circuit high

P0592 - I cant find any information on this code

• P0073 Ambient Air Temperature Sensor Circuit High
• P0717 Input/Turbine Speed Sensor Circuit No Signal
• P0783 3-4 Shift Malfunction

On the transmission, drivers side. In front of the main harness. It is the input speed sensor. small plug.

The PO717 code is for the transmission input speed sensor, or the wires. The sensor is located inside the transmission.

Not sure which sensor that is. Code 717 is for a turbine input sensor which could be the torque converter or the turbine inside the transmission. Either one could be considered input.
You would need a shop manual to get the test procedures for that circuit.

code po717 refers to turbine shaft speed (TSS) sensor-no signal===causes --wiring--TSS sensor--TCM/ECM .Replace the sensor first .

this is the turbine sped sensor circuit stating their is no signal going to it check your connections as well as your fuses ifvthis faiols get with your caddy dealership

Code is for a speed sensor in the transaxle. You could have it replaced or tested.

CODE PO462 FUEL TANK LEVEL SENSOR VOLTAGE LOW. CODE PO717 TURBINE SHAFT SPEED SPEED SENSOR NO SIGNAL. CODE PO722 OUTPUT SHAFT SPEED SENSOR NO SIGNAL. CODE PO500 VECHICLE SPEED SENSOR CIRCUIT MALFUNCTION. SOUND LIKE YOU HAVE TCM ECM PROBLEMS GETTING TOO MANY CODES. COULD HAVE LOOSE GROUND WIRE TO THE TCM AND ECM.

CODE PO717 IS - A/T INPUT SHAFT SPEED SENSOR LOW INPUT CONDITIONS.YOUR INPUT SHAFT SPEED SENSOR COULD BE DEFECTIVE.CHANGE FLUID + FILTER IF IT HAVE NOT BEEN CHANGED IN A LONG PERIOD OF TIME.