Question about Chevrolet Optra

Open Question

Need torque specs for chev optra 1.8lt 2004. - Optra Chevrolet Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 22 Answers

SOURCE: pinion nut torque spec chev

Axle Preload and Backlash Specifications 8.0 Axle Preload and Backlash Specifications Application
Specification
Metric
English
Backlash
0.08-0.25 mm
0.003-0.010 in
Backlash (Preferred)
0.13-0.18 mm
0.005-0.007 in
Pinion Bearing Preload, New Bearings
1.7-3.4 N·m
15-30 lb in
Pinion Bearing Preload, Used Bearings
1.1-2.3 N·m
10-20 lb in
Pinion and Differential Case Bearing Preload, New Bearings
3.4-6.2 N·m
30-55 lb in
Pinion and Differential Case Bearing Preload, Used Bearings
2.8-5.1 N·m
25-45 lb in

Posted on May 20, 2009

Ad
  • 462 Answers

SOURCE: what torque spec for chev aveo 2004 cylinder head

18 lb ft+60°+60°+60°+10°

NEW HEAD BOLTS ARE REQUIRED WHEN REPLACING THE HEAD OR HEAD GASKET.

Posted on Jul 04, 2009

alicantecoli
  • 22484 Answers

SOURCE: replacing front wheel barings on a 2005 chev

the big one tighten with a big bar and pull it to about 120lbs ,the three smaller ones which i cannot place at the moment but if they are 17mm size heads then about 60 but i always feel them as i do them and never use a torque wrench or a air wrench ,just muscle and 40yrs of feel

Posted on Mar 02, 2010

mrjfisher
  • 141 Answers

SOURCE: i need rain guards for my car optra chev 2004 why ...

Hard to find because of the way door sits to the body.
You may not find any are made.

Posted on May 19, 2010

emissionwiz
  • 85206 Answers

SOURCE: Need torque specs for Chevy Venture Van Model 2004 Oil Pan gasket

10-14 footpounds

Posted on Jun 15, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How drain rhe annfreeze or of 2004 chev optra radior


2004 Chevrolet Optra Coolanat Flush: Where Do I Find the Drain ...

https://www.2carpros.com/questions/2004-chevrolet-optra-coolanat-flush
  1. Cached
  2. Similar
Mar 10, 2014 - Where do i find the drain plug for the coolant flush. Reply 1: Its on the bottom of the radiator. If you cant reach or see it just take off the ...

drain rhe annfreeze or of 2004 chev optra Google Search

May 18, 2017 | Cars & Trucks

1 Answer

I need torque specs for head bolts on my 2000 chev venture. Head warped due to excessive overheating.


hope you dont plan on the same head unless its planed out..autozone has torque specs..

Jan 30, 2013 | Cars & Trucks

1 Answer

I need the torque specs for the main bearing and conecting rods for a 2000 chev S-10 W/2.2L engine code (4)


I show the main bearing torque to be 70 ft.lbs.
The rod caps are torqued to 38 ft.lbs.
Best of Luck to you..

Aug 26, 2011 | 2000 Chevrolet S-10

1 Answer

I need torque settings for Chev. 4.3 6 cyl for Rods, Mains, Headbolts, Cylinder Head, and Cam shaft timeing


http://www.torkspec.com/torkspecme.aspx?KI=12-4.3L-262ci-V6 Try this link out. It has various torque specs listed for the 4.3. Be sure to check the years to ensure it is the proper torque spec for your vehicle. Also this may not have all the torque specs you asked for, but I believe it has most of them.

Jul 22, 2011 | Chevrolet S 10 Cars & Trucks

1 Answer

I need rain guards for my car optra chev 2004 why is hard to find them


Hard to find because of the way door sits to the body.
You may not find any are made.

May 17, 2010 | Cars & Trucks

1 Answer

What torque spec for chev aveo 2004 cylinder head


18 lb ft+60°+60°+60°+10°

NEW HEAD BOLTS ARE REQUIRED WHEN REPLACING THE HEAD OR HEAD GASKET.

Jul 04, 2009 | 2004 Chevrolet Aveo

2 Answers

Torque specifications cylinders head bolts


for 1.5/1.6L DOHC, 18 Ft-lbs + 70deg + 70deg + 50deg

for 1.8/2.0L DOHC, 18Ft-lbs +90deg + 90deg +90deg

Jun 09, 2009 | 2001 Daewoo Nubira

1 Answer

2004 chev optra ls


hi,you mention your struts,try to replace and check also your suspension bushing,if not try to check your chassis alignment,ty

Apr 13, 2009 | 2007 Mercedes-Benz ML500

1 Answer

Tightening head


New Headbolts are recommended

Long bolts are torqued to 46'lbs + 90 degrees.

Short bolts are torqued 43'lbs + 90 degrees.

Start in the center, and work to the edges, torquing the bolts in two stages.

Rockers are torqued to 22'lbs.

Dec 21, 2008 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...