Video on how to install auto page alarm on a 96 Honda Accord LX

I am not sure which style of a Honda Accord you have but one of these should help:
https://www.manualslib.com/brand/honda/automobile.html

the dash resistor for dash lights

There is a seal where the distrubutor is you have to mark the distrubutor and then remove it replace the seal and reinstall the distrubutor.

People, he asked for the psi, not how to do it and everything else. High side, 35-50 psi. Low side 20-35 psi. Very simple question to answer. He likely knows how to do it, just needs the psi for high and low.

temperature sensor for the auto choke

Sir,
You are suggested to check the all fuses of you car and do also check the battery if have passed above 10 months .

depends on the model. Some come from honda, others come with the option to have it added later from honda or aftermarket. I have an LX accord and that was the case so I had it installed aftermarket but my HX civic had it stock from honda. (contact honda to see if that is an option for your model)

Hi,
Does the vehicle have an aftermarket alarm system? Is the valet switch for this what you are looking for? If so, it depends entirely on who installed it as where they have put it, although it's usually under the dash on the driver’s side. Some alarms have different sequences that you have to go through to put the alarm into valet mode; it's not usually just a switch that you flick. Best to pop into an alarm or stereo installer and see if they can spot it for you, or if the car is immobilized, find out what sort of alarm it is and call an installer for the info on the valet procedure.

Thank You for contacting Fixya.com

Check out this site: " simple.DIY: rid your transmission of notchiness/ Transmission fluid change ..."

http://honda-tech.com/zerothread/1944026