Question about Hyundai Atos

Open Question

I have a Hyundai Atos. the reverse lights don't come when I put my gear in reverse, the bulbs are both good. where is the fuse for the reverse light fuse?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: Lighting prblem

MY BRAKE LIGHTS DONT WORK. I CHECKED FUSES AND THEY WORK. I CHECKED BULB AND ARE GOOD. WHEN I TURNED MY HEAD LIGHTS THEY WORK BUT WHEN I PUSH THE BRAKE PEDAL THEY DONT.

Posted on Nov 08, 2008

Ad
emissionwiz
  • 85020 Answers

SOURCE: s80 backup light wont work

There are only 2 things to check other than the bulbs, 1st the back up lite fuse, and the 2nd the back up light switch on the trans, if the fuse is ok replace the backup light switch.

Posted on Nov 19, 2008

  • 88 Answers

SOURCE: hyundai accent 2006 brake lights not working

brake light switch under the brake pedal. COMMON PROBLEM OF ACCENTS. 15 TO 20 BUCKS

Posted on Dec 23, 2008

alicantecoli
  • 22484 Answers

SOURCE: No brake lights - good bulbs, good fuse, Flashers

renew the brake light switch it has two circuits inside it

Posted on Sep 17, 2010

Testimonial: "I can't believe how quick the response was, and it verifies what I suspected. I wanted another opinion before I purchased a new switch, Thanks!"

ps7247
  • 28 Answers

SOURCE: Rear Brake Lights not working (Hyundai Atos Prime GLS 2007)

could be a bad ground on the light socket or try to buy 1 bulb to see if it works because there is actullay 2 lights in each bulb one for brakes and one for tail light

Posted on May 02, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't the reverse lights come on when car is in reverse?


Reverse switch bad located in the gear selector

Oct 20, 2015 | Cars & Trucks

1 Answer

How to replace, step by step, the rear brake light bulb on hyundai atos 1999?


How Do You Change Tail Light Bulb
Remove the wiring harness from the tail light lens assembly. Disconnect tail light bulb from the wiring harness socket. Reconnect the wiring harness to the tail light lens assembly. To confirm proper installation of the new tail light bulb, place the key in the on position.
IT IS VERY SIMPLE OR GO TO AUTOZONE AND HAVE THEM CHANGE IT OUT FOR YOU AND WATCH THEM ONCE. GOOD LUCK.

Jul 01, 2015 | Hyundai Cars & Trucks

2 Answers

My 2010 Hyundai genesis gear selector has no lights, Where is the fuse?


usually in the fuse box under the dash check owners manual

Mar 28, 2015 | 2010 Hyundai Genesis

1 Answer

Hyundai tuscon 05. Reverse light doesnt work, bulb fine ,fuse are good and new switch installed. What next?


Does bulb socket have a ground wire, or just uses mounting point as ground? Check for voltage at each part of system. Start with fuse, then switch both in and out of reverse, then bulb.

Dec 19, 2014 | Hyundai Tucson Cars & Trucks

1 Answer

My reverse lights don't work on my 2000 323CI 5 speed BMW when in gear


The fuse holder contains 10A fuse F27 which supplies power to the reversing light switch. When you shift into reverse with the engine running, the switch closes and the back up lights turn on. If the fuse is OK, you may have a defective switch

Oct 17, 2012 | BMW Cars & Trucks

1 Answer

I don't have any reverse lights on my 2000 toyota avalon


if the bulbs are good, then check the signal from the transmission range switch.you can check that at the bulb socket with the park brake set, the key on/engine off and put trans in reverse. use a test light and check power in the light socket. no power indicates bad fuse, bad wiring, or bad range switch.

Jun 14, 2012 | Toyota Avalon Cars & Trucks

3 Answers

Rear Brake Lights not working (Hyundai Atos Prime GLS 2007)


could be a bad ground on the light socket or try to buy 1 bulb to see if it works because there is actullay 2 lights in each bulb one for brakes and one for tail light

May 02, 2012 | 2007 Hyundai Atos Prime

2 Answers

All fuses are good - brake lights, rear running lights work fine. but the reverse lights won't come on when put into reverse. Any idea what might be going on? As far as I know the bulbs are still good...


You will need to either replace or adjust your backup switch, it is located on the transmission next to the shifter. Hope this helps, thank you for using FixYa!

Jul 06, 2011 | 2000 Pontiac Sunfire

1 Answer

Reverse lights won't come on when i shift it into reverse


it could be the switch in the shifter selector

Jul 11, 2010 | 2005 Hyundai Tiburon

1 Answer

My backup lights will not come on when in reverse; bulbs are good and fuse is not blown; where is the switch for the reverse/backup lights???


the reverse back up lights usually light up when the car is in reverse gear.., however get the wiring checked as you already have checked the fuse and bulbs.

Mar 03, 2010 | 1994 Mercedes-Benz C-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...