Question about GMC Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
take off the cover on the top and bottom of the steering column just behind the wheel. pop the tilt lever out simply just by grabbing it and give it a good tug. then once you have the new switch and you get in there your going to need an inverted torx socket to remove the small bolts that hold the switch to the column. do not move the gear on the new switch make sure it lines up exactly as the old one did!!!!!!!!!!!!
Posted on Mar 15, 2009
SOURCE: 97 GMC Z71 4X4 Not Locking in
If it's a shift - on - the - fly 4wd, then call your local Chevy truck dealer. There was a recall on the Electronic 4wd on these trucks. (common problem). Try this just for the heck of it. With the truck stopped, put in 4hi/lo, then put it in reverse. Back up slightly, (about 5ft or so) and then put it in drive (or first in a manual trans) and go forward. Did it lock in? If it locks in but won't unlock, try backing up to unlock. Hope this helps.
Posted on Jul 26, 2009
The fuse is actually a Relay Switch and its located in the Fuse Relay Center on the driverside of the engine compartment. The Black Box is labled Fuse Relay Center, the diagram on the cap displays which Relay is the Fuel Pump relay...the Relay switch is usually $8-$15 depending on where you shop
Posted on Jul 28, 2009
Tips for a great answer:
Jan 26, 2016 | GMC Cars & Trucks
Jul 08, 2014 | 1999 Chevrolet Astro
May 26, 2014 | 1997 GMC Safari
Jun 11, 2009 | 1995 GMC Safari
Mar 13, 2009 | 1999 GMC Sierra
Dec 09, 2008 | 1997 GMC Sierra
Jun 04, 2019 | GMC Acadia Cars & Trucks
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: