SOURCE: brake caliper removal
Sometimes they use a T-50 torx bit, and sometimes they use either a 15mm or 18mm bolt, however the caliper bracket is a 21mm bolt
SOURCE: 2002 Pontiac Grandam, Rear Brake Pad Change
my 99 takes a 15mm to swing down the caliper and a 13mm to remove the housing
SOURCE: headlight bulb size for a 2002 grand prix
You need a 9007 bulb
In order to change the bulb, just loosen/remove the two bolts holding the entire light assembly in
(side marker, headlight and turn signal)
Once these bolts are removed the entire assembly will shift / slide out away from the center of the vehicle. Once the assembly is
removed you will have access to the wires/bulb.
395 views
Usually answered in minutes!
×