Question about Lexus Cars & Trucks
When it is cold check your antifreeze and fill to marks ...when these engines shut off the hot water stands inside the motor and does not circulate and actually causes overheating of the engine for a minute when the engine is off.it it might be a good idea to flush the cooling system and put new antifreeze in it.
Posted on May 03, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The flashing is telling you that the engine is mis-firing, the dealer will run a test to determine the cylinder that is mis-firing, chances are it is something simple
Posted on Dec 01, 2008
go to auto zone, advanced autoparts, or a certified mechanic and ask if they can reset the codes, it should be free
Posted on Jun 17, 2009
you need a scan tool to clear the fault code before the light will go out, but a health check should be performed to see if any other problems exist.
Posted on Oct 03, 2009
SOURCE: 2001 lexus ls430: warning
yaw sensor is out of calibration, most likely from hoisting vehicle in air. sensor needs to be calibrated before light will go out. jump pin 3 and 5 of dlc under driver side dash. connect jumper wire with ignition off, turn ignition on, vsc light should flash, let it flash for awhile (10 sec). turn ignition off and disconnect jumper wire.(do this with vehicle station on ground).
Posted on Sep 21, 2010
Tips for a great answer:
Jul 16, 2014 | Lexus LS 400 Cars & Trucks
Sep 13, 2012 | 2001 Lexus LS 430
Sep 03, 2010 | Lexus LS 430 Cars & Trucks
Dec 14, 2009 | 2004 Lexus LS 430
Oct 03, 2009 | 2004 Lexus LS 430
Sep 21, 2009 | Lexus LS 430 Cars & Trucks
Jun 17, 2009 | 2001 Lexus LS 430
Apr 15, 2009 | 2001 Lexus LS 430
Jul 22, 2008 | 2002 Lexus LS 430
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: