Should be #33 for the front and 34 for the rear. #33 is red circled in the picture of the engine compartment fuse box.
SOURCE: Fold down rear seats
THE SEAT RELEASES ARE IN THE TRUNK IN THE AREA WHERE THE SPEAKERS ARE NEAR THE EDGE OF THE TRUNK OPENING.
Remove fuses 10 and 11 in the underhood junction box. Leave out for 5 minutes then reinstall. If the seats start working your Zephyrs dual climate control seat module will need replaced.
SOURCE: How do i remove the seats in my 99 chevy malibu
you can remove the seats and you have to remove the seat belts and the side molding it's not that hard just a little more work if you need more information I'll be more then happy to help good luck
SOURCE: heated seats don't work
See GM TSB 05-08-143-001, If you have Adjustable pedals, especially if they don't work with the memeory buttons, but function with thier own buttons. Its the Brake Pedal Position Sensor is shorted and mesing up the seat module which controls the heaters too. My 05 Suburban had the same issue. Can check by unplugging switch and see if heated seats work .
SOURCE: 2004 Malibu with broken weld on seat motor
you will have to replace the complete assy. the cheapest way is look for a complete wrecking yard seat, or have yours welded at a local machine shop
170 views
Usually answered in minutes!
×