2007 hyundai accent error code p0496 diagnostic test says gas cap ????

codes are OBDll and available on line free..google P0496 code.

Can a loose gas cap cause code P0496?
Check the Gas Cap

The first thing you should check whenever your car has a P0496 code is your gas cap-make sure it's not loose because a loose gas cap can trigger a P0496.l

https://www.kbb.com/obd-ii/p0496/

https://www.yourmechanic.com/article/p0496-obd-ii-trouble-code-evap-flow-during-a-non-purge-condition-by-valerie-johnston

P0496 EVAP Flow During Non Purge Condition
Try this link.. it's information is very thorough and accurate. Good Luck

If you need further help, I’m available over the phone at https://www.6ya.com/expert/lynn_f08552ff80c75888

evap flow during non-purge condition
P0496 EVAP Flow During Non Purge Condition P0496 Chevrolet Evaporative Emission System Flow During Non Purge

Dont drive a car with the light flashing. A flashing check engine light means that something is really wrong and you can damage the engine if you drive it.

You need to take your car to Autozone and have them read then clear the code before worrying about anything,it needs to come back on to be a hard code,Make sure you tighten your gas cap three or four clicks past tight
P0496=.http://www.diyobd2.fr/wholesale/fvdi-abrites-commander-for-bmw-and-mini-v96-2308.html Evaporative Emission System High Purge Flow

Code 496 is not about the gas cap.
The code means the computer has detected pressure in the EVAP system when it should not be there.
The EVAP system consists of lines and valves that vent the gas tank to the vapor canister and the engine.
The problem could be one of the valves or the pressure sensor. You may need a shop manual to get the diagnostic steps to test the system.

Related Searches: GM Parts - GM History - GM Diagnostic Codes - More... Web Results 1-10 of 266 Code P0496 - Evap system error - SaturnFans Forums
Reading on the P0496 code, I don't know for certain that the solenoid on the manifold is your problem. On my Impala and

Check the gas cap,also,it could mean the evap system is not working,or you have run out of gas recently,if all this checks out ok,then the tank is not venting properly.

possible sticking purge valve P0496-evap emissions high purge flow fault

is po496 code for gas caps only ?