I am having a real hard time getting it started I have just bout everything plugged that a hose goes to.when I do get it started when I put the breather on it it dies
You didn't say what kind of machine you have but just by the sound of it you either have a bad needle and seat or a heavy float in the carb. It has to be one or the other. I hope this helps. Take care.
SOURCE: Car starts hard and runs rough in cold weather, undrivable
The correct spark plugs are very important. Glad to hear you got it fixed good.
SOURCE: my 1987 chrysler conquest tsi floods the engine and won't start
your best solution wont work because it is an 88 they can only scan '96 and newer when OBD II came out so know what you are talking about before you post
those cars are known for fuelinjection probs. your best bet is to first get your self a fuel pressure regulator and Gauge to determin how much fuel you are pushung and get it tuned up by some one who knows what they are doing because tuning will make or break a turbo car
SOURCE: hard to start and won't stay running
Put fuel in it,then check the fuel pressure with a gauge. The tank unit maybe giving a false reading.
SOURCE: truck won't stay running
Check the fuel pressure at the Shredder Valve, You should have 60PSI to 65PSI upon start and should drop about 5PSI when running. If your fuel pressure is good then it may be a bad injector system. The fuel injector spider system that the vortec has are know to go bad, from the fuel pressure regulator to the puppet fuel valves. Change the fuel filter first if it has not been changed yet and have the fuel pressure check. Good luck and keep me posed. Note: it's been know that spraying ether to start the vortec with the spider injector system has got the puppet valves to catch fire and melt the ends of the puppet valve leading to the replacement to the whole system. Good luck and keep me posted, be glad to help.
SOURCE: Toyota 22r starts hard and floods. Repalced
It sounds like the carb. float is set to high and /or the needle and seat has some dirt in it allowing to much fuel inside the carb.. This will allow to much fuel into the engine.It seems the carb could use a rebuild and dont forget to replace your fuel filter.I hope this helps.
23 views
Usually answered in minutes!
×