First, check the oil level. Is it the oil service light? If so have the oil changed and reset the monitor. If it is indicating low oil pressure you will need to put a manual gauge where the pressure sensor is and get a reading. If reading is ok then put in a new sensor. If manual gauge shows low or no pressure the tow to a shop. Better yet , take it to a shop asap.
SOURCE: 1995 dodge avenger,put 3
You need to check the Timing Belt cover and check to see if the Oil Pan has a crack or anything like that.
Good Luck!
If you have any more problems let me know.
Thank you for using Fix Ya!
Don't forget to rate the overall satisfaction of this answer.
SOURCE: how do i take the oil light off my doge avenger
try turning the key on but dont start the car and hit the gas peddle 3 times. that works with most cars.
SOURCE: i need to put in 3 sensors in my 2008 dodge
I need to know what three sensor you want to replace?
SOURCE: Location Of input an output Speed Sensor on 1996 dodge avenger
According with repair manual, output speed sensor is located on the
Transmission, generally positioned over the park gear and monitors
transmission output shaft rotating speed; check some details in the next
image...
Hope this helps; also keep in mind that your feedback is important and I'll appreciate
your time and consideration if you leave some testimonial comment about
this answer.
Thank you for using Fixya, and have a nice day.
94 views
Usually answered in minutes!
×