I NEED TO KNOW THE MOST PROBLEM IN THE LIGHTS OF AUDI AND THE SOLUTION OF THAT PROBLEM

get your car fix right now
2002 Audi A4 Workshop Repair Service Manual PDF Download

Nick, could not find a lot on this problem, possible loose ground to cluster. Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Digital Display on Instrument Cluster May Fail Audi A6 Common...

http://www.vwaudiforum.co.uk/forum/showthread.php/35321-Audi-A4-Dashboard-Instrument-Panel-Light-Bulb-Dash-Light-Fix

Faulty instrument cluster AudiWorld Forums

dash lights blinking on and off TDIClub Forums

XENON LIGHTS I MUST GUESS??U NEED TO HAVE THE CAR TESTED FOR DTCS!!LET ME KNOW HOW U DID !!!

You don't have a book for it ?
What sign you need to know ?

I dont know much about audi, but on most domestic ford chevy etc. theres a braklight switch under the dashboard tat actually controls the brake lights, its vary possible that it may be defective.

i have a light that comes on my audi a3 1.8t dash board .it is round with a cross through it and like a little box on top can any one tell me wat this is thanks

my brake lights r not working the lighjt is always on could this because pads r low or is it a wiring issue changed fuses and bulbs audi quatra a 4

START engine and turn on head lights to main beam if engine stops and battery is flat then the Alternator isent putting out 13.5 volts or 12volts so then turn off lights and turn on inn and with a test light check power lead on Alternator if you have power to alt then you have either Reg or brush problem .
Take it off and get it tested and if slightly faulty then get a change over one and refit start and recheck your head lights as they should come bright when engine runs evan at idle .
ITS that easy

These guys have some cool interior xenon bulb kits - take a look:

http://www.xenonfactory.com/products/interiorlight/audi.htm

The switch is not set up that way. you can rewrite the coding in the convenience control module to do this maybe.