Check this chart for your torque settings.
http://www.championbrands.com/aera-torquespecs.pdf
SOURCE: hyundai elantra 1.6GLS J2 torque settings
dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm
SOURCE: I need to know what the spark plug gap setting
2006 Hyundai Accent Gl 1.6 L4 C FI
STANDARD BKR5ES-11 GAP 044
V-POWER BRK5E-11 '' ''
G-POWER BKR5EGP ''
LASER PLATINUM PFR5N-11 ''
OE LASER IRIDIUM IFR5E-11 ''
IRIDIUM IX BKR5EIX-11 ''
DO NOT TRY AND GAP THE PLATINUM OR IRIDIUM TYPE.
I hope this engine is the same for you,if not let me know the engine code.
SOURCE: big ends torque settings head torque
10 mm bolts
step 1 22 ft lbs.
step 2 60 degrees
step 3 additional 60 degrees
12 mm bolts
step 1 26 ft lbs
step 2 60 degrees
step 3 additional 60 degrees
SOURCE: require torque settings for a hyundai tucson 2008,gls petrol engine
Specifically which torque settings are you referring to. There are thousands to choose from. Please give an example such as "differential carrier", "cylinder head", "exhaust manifold to engine block" etc.
402 views
Usually answered in minutes!
×