Question about Lexus Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.
Posted on Dec 18, 2008
What was the code? lean mixture? If so make sure there is no leak in the exhaust. I have worked on a lexus suv, but it was an 89. It had a lean mixture code. After examination I noticed a exhaust leak which was not apparent at first, there is a section in the exhaust the is very thin, and prone to leakage, causing the lean mixture code.
Posted on Jun 30, 2009
Oxygen sensors are always numbered like this:
Bank 1 sensor 1
Bank 2 sensor 1
Bank 1 sensor 2
Bank 2 sensor 2
some manufacturers use a kind of shorthand that reads different, but means the same thing:
Sensor 1/1 or O2s 1/1
Sensor 2/1 or O2s 2/1
Sensor 1/2 or O2s 1/2
Sensor 2/2 or O2s 2/2
Bank 1 is always the side of the engine where cylinder number 1 is located and, of coarse, Bank 2 is the opposite side.
On a 4 cylinder engine, there is only 1 bank and it is always referred to as Bank 1.
Sensor 1 is always the upstream sensor (The one located BEFORE the catalytic converter)
Sensor 2 is always the downstream sensor (the one that is located AFTER the catalytic converter.
Most GM engines have #1 cylinder located on the left bank, (or Driver's Side) of the engine,
So, the answer to your question would be that you are looking for the sensor located before the catalytic converter on the right (or Passenger Side) of the truck.
Posted on Oct 17, 2009
B1 means the sensor is located on the same bank of the engine that has the #1 cylinder. B2 is located on the opposite bank.
S1 means the sensor is located BEFORE the catalytic converter
S2 means the sensor is located AFTER the catalytic converter
You didn't say which engine you have, so I've included the diagrams of both 4 cyl and 6 cyl so you can see the banks
Posted on Oct 20, 2009
Tips for a great answer:
Sep 25, 2017 | 2010 GMC Acadia
Oct 01, 2016 | 2010 Lexus RX 350
Jan 03, 2016 | 2010 Lexus RX 350
Nov 14, 2011 | 2010 Lexus RX 350
Aug 06, 2010 | 2009 Lexus RX 350
Oct 04, 2009 | 1995 Lexus LS 400
Jun 30, 2009 | 1999 Lexus ES 300
May 01, 2009 | 2001 Lexus Gs 300
75 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: