SOURCE: mazda interchangeable years
There are a ton of 626 forums on the net, those are the best resource for researching that.
http://www.google.com/search?sourceid=navclient&ie=UTF-8&rls=GGLG,GGLG:2005-37,GGLG:en&q=mazda+626+forum
SOURCE: leaking front axel seals on 2006 gmc 2500 4x4 hd
There should be a big nut in the center of the wheel hub. You will have to remove atleast one of the ball joints if it's IFS.
SOURCE: 1998 GMC Sonoma threw code P1133 02S 1/1
P1133 - Heated Oxygen Sensor (HO2S) Insufficient Switching Bank 1 Sensor 1
I would have the repair shop see if they either damaged or left disconnected the oxygen sensor for engine cylinder bank one upstream sensor, this sensor would have been disconnected if the oil pan was removed.
SOURCE: my 95 honda accord V6 leaks oil ( lots ) . only
Yes, I think you're right that it's the seal that is leaking.
SOURCE: Need a engine diagram for
Just a little advise before you jump to thinking the rear main seal is leaking. The vast majority of the oil leaks from these 2.8L motors are the rear intake manifold seal and the distributor o-ring. I would check them first. The rear main seal is in the lower rear of the motor, you have to remove the transmission to replace ti.
66 views
Usually answered in minutes!
×