I need to replace the Starter Switch on my 2000 GMC Sierra 1500. Would I need to remover the steering wheel in order to do this?

SOURCE: removal of power steering pump on 1998 GMC Sierra 1500

you need a power steering pump puller the rest is simple any trouble let me know

SOURCE: how to replace a starter on 1994 gmc sierra 1500

unhook the battery, there are 2 wires on the starter solenoid, 1 is a 5/16 nut and the other is a 9/16 nut remove those wires. this maybe easier to remove the heat shield first. next ther are two 9/16 bolts holding the starter in position, remove, and the starter will come out, about a 15min job

SOURCE: Need to replace fuel filter on 2000 GMC Sierra

under the drivers side door, on the frame....

SOURCE: Steering Wheel Lights not working

they just pop out small screw driver pry out

Johnny Brown

• 5763 Answers
• Posted on Nov 09, 2010

SOURCE: replacing turn signal switch in a 2006 Dodge Ram

NO, the steering wheel stays on, all you need to do is remove the covers, look under the bottom cover there will be screws that hold the top and bootom covers together, after you remove the covers you will see two screws that hold switch to column, remove them piull switch out and remove connectors and then install new one, heres a picture of the switch to help you, good luck, hope this helps.