At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to change the fuse box on a 2003 3500 Dodge...
There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few .. l et me know if u need help
thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
look under the hood there should be a box with all the fuses it will be under that box, if not open the driver side door, and it will be on the side panel to the left of the steering wheel
The hub bearing retaining bolts are 150 ft. lbs the center axle nut primary torque 135 ft.lbs rotate 5-10 times increasing torque by 50 ft.lbs until final torque of 265 ft.lbs is reached
For the brake lights check that no fuses are missing. Then check them all you should get a fuse tester. Go to the junk jard and get the cover if anything. For the headlights its common for moisture to get in the headlight bulb connector or harness and get corroded. Take the bulbs out and clean the connections with a wire brush or how ever you choose then put as much bulb grease as you want on the connection. This should take care it. Clean the inside of the harness too.
Are the tie rod ends tight? Is the trac bar (frame end) tight? The steering boxes on these trucks require more input that a 1/2 ton truck or a car. How is the alignment? The caster on these should be set to about 5 degrees, the original specs allow a lot of wandering.
×