2003 325i. How can I install a serpentine belt?

If you Google 2008 Kia Sedona serpentine belt you get several YouTube videos https://youtu.be/ojU2jgP1HNk

Search Results

images for diagram on how to replace a serpentine
How To Install Replace Serpentine Belt Oldsmobile Alero 99 ...? 3:33https://www.youtube.com/watch?v=jkzXTt43uwwFeb 9, 2012 - Uploaded by 1A Auto PartsHow To Install Replace Serpentine Belt Oldsmobile Alero 99-04 2.4L .... There should be a belt routing diagram on the frame rail or under side ...serpentine belt install 3.1/ 3.4 v6 - YouTube? 4:00https://www.youtube.com/watch?v=GYoWuvEZ2DcMay 6, 2013 - Uploaded by JoeTheAutoGuythis a serpentine belt install video on a 3.1 liter gm v6 , 3.4 liters are the same in ... Replacing the alternator or serpentine on anyOldsmobile Alero 99-04 3.4 Liter ... Serpentine Belt Replacement 1995-2005 Chevrolet Cavalier .

The snapped belt has a number mark.

How To Install Replace Engine Serpentine Belt Volkswagen ...

? 6:09
https://www.youtube.com/watch?v=urBVruIk348
Dec 31, 2011 - Uploaded by 1A Auto Parts
How To Install Replace Engine Serpentine Belt Volkswagen Beetle 1AAuto.com ... Well, the serpentine belt on my Bugbroke. And, didnt know ...

Help! Serpentine belt broke, need advice. - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=323672

Jul 11, 2011 - Basically, I think the serpentine belt blew on her, she drove about 1/8 ...TDI(s): 2005 Passat Wagon, 2004 Jetta,99.5 Golf ... BTW, last year I lost my AC belt rather abruptly. .... 2005 VW Passat GLS TDI (Chipped, BSM delete, and Manual ), 2007 VW Eos 2.0T, 2002 Mazda MPV ES, 2015 Toyota Sienna XLE. 1.6 tdi alternator belt tensioner bolt snapped
Dec 29, 2013
Serpentine Belt Tensioner (A4 ALH) Keeps breaking!!!!!!
Jul 29, 2013
Serpentine belt tensioner?
Sep 17, 2012
ALH Serp. Tensioner Damper Failure w/ pics and video
May 21, 2011
More results from forums.tdiclub.com

VWVortex.com - Broken timing belt, valves likely bent

forums.vwvortex.com > ... > Golf IV & Jetta IV

Application:
With A/C

Kia_Sedona_2002-2006
Accessory Drive Belts

• ACCESSORY BELT ROUTING
• INSPECTION
• REMOVAL & INSTALLATION

Print

Accessory Belt Routing

Fig. Accessory serpentine belt routing-3.5L engine

Fig. Accessory serpentine belt routing-3.5L engine

Fig. Accessory serpentine belt (A) routing-3.8L engine

Inspection

Inspect the drive belt for signs of glazing or cracking. A glazed belt will be perfectly smooth from slippage, while a good belt will have a slight texture of fabric visible. Cracks will usually start at the inner edge of the belt and run outward. All worn or damaged drive belts should be replaced immediately.

Removal & Installation

1. Disconnect the negative battery cable.
2. Rotate the auto tensioner clockwise to release tension, then remove the drive belt.

To install:

1. Install drive belt (A). Route the belt over the components in the following order: Crankshaft pulley - A/C pulley - idler pulley - generator pulley - water pump pulley - P/S pump pulley - tensioner pulley.
2. Rotate auto tensioner arm in the counter-clockwise moving auto tensioner pulley bolt with wrench.
3. After putting belt on auto tensioner pulley, release the auto tensioner pulley slowly.
   
   

   Fig. Accessory serpentine belt routing-3.5L engine
   
   
   

   Fig. Accessory serpentine belt (A) routing-3.8L engine
   

The 8th digit of your car's VIN (vehicle identification number) tells you the engine
type for your car - your choices for Ford Taurus are U (3.0L), and S (3.0L).
I've included the Ford SHO engine too.




Serpentine belt for 3.0L (Vin U) Ford Taurus


Serpentine belt for 3.0L (Vin S) Ford Taurus


Serpentine Belt for Ford 3.4L SHO engine


Water Pump belt for Ford 3.4L SHO engine

REMOVAL AND INSTALLATION

1. Attach a 15mm socket or wrench to the bolt attaching the tensioner pulley.
2. On all 3.0L (OHV) engines, rotate the drive belt tensioner clockwise to relieve belt tension and slide the belt off the pulleys.
3. On 3.0L (DOHC) engines, rotate the tensioner counterclockwise to relieve belt tension and slide the belt off the pulleys.
   

To install:

1. Install the drive belt on all the pulleys except the tensioner pulley.
2. Rotate the belt tensioner as outlined in the removal procedure to relieve belt tension and install the belt onto the tensioner pulley. Make sure the V-grooves make proper contact with the pulleys. Make sure the spring keeper releases or improper belt tension will occur.

Tip: you may want to get (free) a serpentine belt installation tool kit to help with this job.
Both Advance Auto Parts and AutoZone wisely have loan-a-tool programs that permit you
to borrow (for a deposit) their serpentine belt installation kits - which allow their
handy customers to use their auto parts rather than towing it to a garage.

2.8L and 3.1L Air Pump Belt

1. Disconnect the negative battery cable.
2. Loosen the air pump.
3. Remove the worn belt.

To install:

1. Adjust the belt to specifications and tighten the pump mounting bolts.
2. Connect the negative battery cable.

2.3L Power Steering Belt

1. Disconnect the negative battery cable.
2. Loosen the adjustment bolts.
3. Remove the power steering belt from the pulley.

To install:

1. Route the belt around the pulley.
2. Adjust the belt to specifications, then tighten the adjustment bolts.
3. Connect the negative battery cable.

See Figures 6 through 15

Fig. Fig. 6: Unfasten the retaining bolts...

Fig. Fig. 7: ... then remove the serpentine belt guard

Fig. Fig. 8: ...

Fig. Fig. 9: ... then remove the serpentine belt

1. Remove the belt. Clean the accessory drive belt surfaces.

Fig. Fig. 10: Serpentine drive belt routing-2.2L engine

Fig. Fig. 11: Removal and installation of the serpentine belt-2.3L engine

Fig. Fig. 12: Serpentine belt routing-2.5L engine with and without A/C

Fig. Fig. 13: Use an 18mm box end wrench on the pulley nut to rotate the tensioner on the 3.8L engine

Fig. Fig. 14: in. breaker bar to rotate the tensioner

Fig. Fig. 15: On the 3.4L, use a box end wrench, then rotate the tensioner clockwise and remove the serpentine belt

Remove the belt guard or coolant recovery reservoir as required.

2004 SUZUKI FORENZA - L4 2.0L 2000cc GAS FI N

Adjustment
The belt is automatically adjusted by the auto tensioner.


Drive Belt Routings



Fig. Accessory drive belt routing-2.0L engine



Removal & Installation

1. Remove the air filter housing assembly bolts and the air intake tube.
2. Remove the air filter housing assembly from the vehicle.
3. Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
4. Remove the serpentine accessory drive belt.

To install:

1. Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
2. With the wrench in place on the tensioner bolt, loop the serpentine accessory drive belt loosely over the pulleys.
3. Slip the belt over the tensioner.
4. Remove the wrench from the tensioner bolt and the belt will tighten itself.
5. Install the air filter housing assembly into the vehicle.
6. Install the air intake tube and the air filter housing assembly bolts.
7. Tighten the air filter housing assembly bolts to 53 inch lbs. and nm

I really hope helped with this. remember rated this help. Good luck.

Good morning! I am enclosing a serpentine belt routing diagram to aid in the installation of your serpentine belt. There are 4 different engine possibilities but i have enclosed all. The serpentine belt tensioner is released by rotating in a clockwise direction as shown in the diagrams. Engine configuration will determine what tools you need but the installation is relatively easy to do. Have a great day!

You need to have an automotive technitian install a new belt because there is a certain path the belt must follow before it will go on, plus the belt must go around the A/c as it is part of the path. You just don't have to use the A/C.

Tell the tech that the belt broke so that he can look for a reason as to why the belt broke.
Bill