Check the vacuum hoses for a leak
SOURCE: 94 dodge truck,318 engine,standered,1/2 ton,
Have you run a self test? any codes, with those it can help resolve issue of rich run.
SOURCE: random lights coming on in the dash and stalling occasionally
See if you can find out if there is a code for the check engine lite and the abs, those can be related if the speed sensor located on the top of the rear axle is intermittantly failing. That sensor sends the speed signal to the pcm and the abs controler witch will also turn off the cruise control.
SOURCE: 1992 dodge 318 engine turns over, but no start. No
if truck has a ceramic ballist resistor near and connected to coil this could be problem or the crk posistion sensor could be too, i would change ballast first if you have on your truck appx cost $10
SOURCE: 92 dodge 318 truck engine runs til you stop, then stalls when put
Then i think i'd be dumping some soapy water on the intake gaskets checking for leaks. ANd wiggle the **** out of all vacuum hoses. ( you probably did that) And if there aren't any, your cam could be tired. You got a tough one there. Hard to figure with a keyboard.
SOURCE: I have a 2004 dodge ram 1500 and my truck stalls out
There are two other sensors that may be causing problems. One being the crank position sensor and the other being the Oxygen sensors.
124 views
Usually answered in minutes!
×