Https://www.youtube.com/watch?v=bcdwLGgYAWE
The above link might help.
SOURCE: How do you clean the EGR valve on a 99' Honda Civic?
Pull vacuum on egr valve with engine idling and see if engine stumbles and tries to die until vacuum is released. If this DOES NOT happen the egr exhaust passage is plugged will need to remove egr valve assembly and remove carbon from passage into cylinder head.
SOURCE: Motor Oil leaks from 1999 Honda Civic EX
make sure they are tight
could be time for head gaskets
make sure the old gasket from the old filter came off the block sometimes they come off old filter and stick this causes a leak due to improper seal.
SOURCE: what is the rocker arm torque (ft/lbs.) for a 1995
OK here you go. there are three different engine codes for that model and engine size. first is the D15Z1. This one is 14ft.lbs. Then you have D15B7 and D15B8 these two are the same at 16ft.lbs.
SOURCE: where is the PCV valve on a 2005 honda civic
below the air intake manifold
driver side of the oil filter a black housingis there
have the pcv in hand so u could compare the looks
not too sure but i belive it's screw on good luck
SOURCE: valve tappet clearance of toyota 7k engine
7k clearances are ( HOT ) Inlet 0.008 in ( 0.20 mm )
Exhaust 0.012 in ( 0.30mm)
Welcome to FIxYa.com
this is for a 16 valve 1.5 let me know what engine size you have
Regards, Lee Davidian
Thank you for using FixYa,com.
55 views
Usually answered in minutes!
×