I want to check power to pump is good prior to pulling tank. What is the wiring color for the hot wire (12 volt+) leading into the fuel pump at the tank?
Orange and red wire is positive (+), black is ground (-)
The wire should not be hot until the relay is triggered. The relay does not get triggered until the ignition key is turned on. It will run for 3-5 seconds or until the system pressure it at max.
SOURCE: unsure of color of power wire near fuel tank that i for the fuel pump
It will be a gray wire larger than the others in the connector other than the ground wire which is black.
SOURCE: 1996 f150 fuel pump
Hello;
You may have a break in the wire inside the tank to the fuel pump. I have seen the wires disconnect as the pump is installed.
Rich
RPM Northwest
SOURCE: the hot feed wire for fuel tank where does it come from and how many volts should it read
1995 chevy 1500 pickup. no power to fuel pump. possible wires got cut.need fuel pump wire diag to trace.thank you.
SOURCE: alarm wiring diagram 2008 dodge ram 1500
Check HERE for details.
Also can check this documents.audiovox
Hope this help (remember comment and rated this).
3,191 views
Usually answered in minutes!
×