WHERE IS THE RELAY AND FUSE FOR THE REAR WINDOW DE-FOGGER ON A 2009 BASE VIBE W/ 2.4 L AND A MANUAL TRANNY?

https://www.justanswer.com/pontiac/8x4lj-pontiac-vibe-circuit-opening-relay-fuel-pump.html

Instrument Panel Relay block has a ACC Relay and an ACC CUT Relay.
ACC Relay is for ACC Fuse and CIG Fuse.
ACC CUT Relay is for the Ignition Switch.

System Description NEEL0216 MODELS WITHOUT POWER DOOR LOCKS NEEL0216S01 The rear window defogger system is controlled by the rear window defogger timer. The rear window defogger operates only for approximately 15 minutes. The rear window defogger switch is integral to the air control. Power is supplied at all times
to rear window defogger relay terminal 5
through 20A fuse [No. 25, located in the fuse block (J/B)]. With the ignition switch in the ON or START position, power is supplied
through 10A fuse [No. 5, located in the fuse block (J/B)]
to rear window defogger relay terminal 1, and
to rear window defogger timer terminal 1. Ground is supplied to air control (rear window defogger switch) terminal 8 and rear window defogger timer terminal 4 through body grounds M14 and M68. With the rear window defogger switch (located in air control) ON, ground is supplied
to rear window defogger timer terminal 3
through air control (rear window defogger switch) terminal 8. Rear window defogger timer terminal 2 then supplies ground to the rear window defogger relay terminal 2. With power and ground supplied, the rear window defogger relay is energized. Power is supplied
through terminal 3 of the rear window defogger relay
to rear window defogger terminal +. Rear window defogger terminal - is grounded through body ground R102. With power and ground supplied, the rear window defogger filaments heat and defog the rear window. When the system is activated, the rear window defogger indicator illuminates in the air control. Power is supplied
from rear window defogger relay terminal 3
to air control (rear window defogger switch) terminal 4. Air control terminal 8 is grounded through body grounds M14 and M68. MODELS WITH POWER DOOR LOCKS NEEL0216S02 The rear window defogger system is controlled by the smart entrance control unit. The rear window defogger operates only for approximately 15 minutes. The rear window defogger switch is integral to the air control. Power is supplied at all times
to rear window defogger relay terminal 5
through 20A fuse [No. 25, located in the fuse block (J/B)] and
to smart entrance control unit terminal 49
through 7.5A fuse [No. 28, located in the fuse block (J/B)]. With the ignition switch in the ON or START position, power is supplied
through 10A fuse [No. 5, located in the fuse block (J/B)]
to rear window defogger relay terminal 1 and
to smart entrance control unit terminal 27. Ground is supplied to air control (rear window defogger switch) terminal 8 and smart entrance control unit terminals 43 and 64 through body grounds M14 and M68. With the rear window defogger switch (located in air control) ON, ground is supplied
to smart entrance control unit terminal 14
through air control (rear window defogger switch) terminal 1. Smart entrance control unit terminal 37 then supplies ground to the rear window defogger relay terminal 2. With power and ground supplied, the rear window defogger relay is energized. Power is supplied
through terminal 3 of the rear window defogger relay
to rear window defogger terminal +.
Rear window defogger terminal - is grounded through body ground R102. With power and ground supplied, the rear window defogger filaments heat and defog the rear window. When the system is activated, the rear window defogger indicator illuminates in the air control. Power is supplied
from rear window defogger relay terminal 3
to air control (rear window defogger switch) terminal 4. Air control (rear window defogger switch) terminal 8 is grounded through body grounds M14 and M68

Duralast Relay Part Number: 19273
Alternate Part Number: MR76 at Autozone.com

http://contentinfo.autozone.com/znetcs/product-info/en/US/wl2/20007/image/3

Could be a bad relay !
The rear defogger circuit is protected by a 40A fuse. Voltage is supplied through the fuse to the rear defogger relay. When you press the rear defogger switch, the heater and A/C programmer sends a class 2 message to the body control module (BCM), to ground the rear defogger relay coil output circuit. This in turn closes the relay contacts allowing current to the rear window grid.
Do you know what a class 2 message is ? What a BCM is ?
HTD BK relay in rear fuse box ,location In the center right rear of the passenger compartment, under the rear seat cushion
Watch this video on testing from relay base ( where it plug's into )
Do
VEHICLE RELAYS Testing from the relay base

rear window defogger ? it is fused in your fuse box ! and has a relay to activate the rear fogger ...right ?

not a good idea find another location

There are two fuse boxes. one is under the hood and the other is under the rear seat. there are redundant fuses so check them all.

go to our site for help.

your owner manual has fuse diagrams.

the qtr windows go through the power window relay. If other windows work, not likely the relay or timer module.

you need 12 volts at this wire on the overhead console switches.

Measure the voltage between the power rear quarter glass window regulator control switch C903 , "O/BK" and ground.

If no 12 v, SERVICE the "O/BK" wire between the power window relay and the power rear quarter glass window regulator control switch.
The ower window relay is above and behind the fuse panel on the dash. 2 relays and turn signal flasher in same area. Turn signal light on to locate flasher. 2 bolts hold bracket with relays & flasher.

gerry

http://groups.yahoo.com/group/villagerquest/

they have a relay also make sure conections are good on the window