Question about 2005 Ford Focus ZX4

1 Answer

05 Ford Focus zx4 heater blower will not work? I’ve changed blower motor and resister and still the speed nob will not turn the blower on at all!! Please any help would be greatly appreciated!!! Thank you!

Posted by on

  • Derek Rigsbee Mar 06, 2019

    Yes I just did and they are both good ?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 25,930 Answers
  • 3 more comments 
  • Derek Rigsbee Mar 06, 2019

    Yes I checked both and they are both good ?

  • Andrew Taylor
    Andrew Taylor Mar 06, 2019

    In that case you need a local auto-electrician. Sounds like either the knob, or that control module is faulty.

  • Derek Rigsbee Mar 06, 2019

    Yes I checked them both and they are both good ?

  • Derek Rigsbee Mar 06, 2019

    Where can I find the control module location?

  • Derek Rigsbee Mar 06, 2019

    The thing is the blower has kicked on at different times outta no where?

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: The heater / ac blower

It is the blower resister. I purchasted one at auto zone for $18.00. It is located under the passenger side dash. You need to remove the glove box and the plastic cover under the dash to expose the blower motor. the blower motor resister is right next to the motor. Simply unplug the resister remove the two screws and replace. I did this and now my fan works on all speeds.

Posted on Sep 17, 2008

chrischronic
  • 235 Answers

SOURCE: heater stopped working.. blower not working? 1999 ford taurus

sounds like the blower motor resistor which controls blower motor speed has a short and needs replaced.

Posted on Jan 30, 2009

  • 7353 Answers

SOURCE: Blower motor on 96 Isuzu Rodeo does not blow on

if fuses are good, check for power at blower motor, when truck is running and a/c on. the resistor and the switch provide ground, so the blue/white wire should have power, and the blue/black wire should have NO power, if it does have power, then most likely the resistor is bad. if it has no power and the motor doesnt run, the motor is bad.

Posted on Oct 20, 2009

Testimonial: "I will give that a try.. and post the results.."

  • 279 Answers

SOURCE: how to fix heater on ford focus tried a new motor

check the wiring to the reostat (the resistor that controls the fan speed) also check the reostat has not burnt out. (the reostat should be near the heater motor housing)

please let me know if this helps
cheers
big mike :)

Posted on Jan 04, 2010

2coolrick
  • 560 Answers

SOURCE: diagram on how to install ford focus 2006 zx4 serpentine belt?

Autozone or a similar parts retailer will print one for you for free.

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The heat completely stopped blowing in my 2005 Ford Focus ZX4 what could be the problem?


If it's just temperature, like you're getting cold air, make sure your engine is warming up. If it isn't, check coolant level. If that's good, you might need a thermostat (especially if it takes a long time to warm up). If the fan isn't blowing at all, check fuses for the blower motor. If you only get hi speed out of the blower Motor but not low or medium, your resistor block is the likely problem.

Jan 24, 2017 | Ford Cars & Trucks

1 Answer

Air Conditioning problems.


Fan motors in cars fail commonly. They wear out the brushes and the motor stops or the fuse blows. The other issue with the mode selector may not have anything to do with the motor. The actuator on the mode selector can become stuck or broken and then the air delivery wont go to the right area. All these things should be visible under the dash or behind the glovebox.

Jan 14, 2016 | 2006 Ford Focus ZX4

1 Answer

Heater defroster fan will not work in 2003 Ford


posible you have a bar blower motor

Oct 19, 2014 | 2003 Ford Focus

1 Answer

Diagram for heater control box for ford focus 2005 zx4 se


what do you need ? the one going to the blower motor or blower resister or the blend door motor

Jan 06, 2013 | Ford Focus Cars & Trucks

1 Answer

My Blower motor for my heater on a 99 ford escort is not working.Is it the motor or resister that is gone??the fuses look ok where is the resister located can you send a diagram


look in passenger foot well on blower case for 4 wire connector.



Behind right side of I/P, A/C-heater plenum


resister bad would still allow high speed. may be blower motor.

  • The blower motor does not operate/does not operate correctly
  • Open fuse.
  • Tripped circuit breaker.
  • Circuitry open/shorted.
  • Heater blower motor switch (18578).
  • Heater blower motor switch resistor (18591).
  • Blower motor relay.
  • Blower motor.




bfddb09.gif

Jan 16, 2010 | 1999 Ford Escort

1 Answer

How to fix heater on ford focus tried a new motor


check the wiring to the reostat (the resistor that controls the fan speed) also check the reostat has not burnt out. (the reostat should be near the heater motor housing)

please let me know if this helps
cheers
big mike :)

Dec 18, 2009 | 2000 Ford Focus

2 Answers

'05 Freestyle Heater/AC blower only works on high(4). How do I get at the switch or blower motor. Everything is plastic! Does anyone have a solution? Thanks, Bob.


here is what my book says:
Blower Motor Speed Control To Remove:
  1. Remove the right lower instrument panel insulator.
  2. Disconnect the electrical connector from the blower motor speed control.
  3. Remove the blower motor speed control mounting screws.
  4. Remove the blower motor speed control.

Jul 06, 2009 | 2005 Ford Freestyle

1 Answer

2000 focus se heater fan is running all the time


try to pull the nob off and see if you can turn it off with some pliers the nobs like to strip does it stay one when the car is off?

Jun 23, 2009 | 2000 Ford Focus

1 Answer

Heater fan only works on fastest speed


Your blower motor resistor has gone bad, it should be located next to your blower motor in the car, held in place with a couple of screws, remove it and replace it. The resistor is responsible for making the blower motor run at slower speeds than high or (4). Let me know if this helps.

Jun 16, 2009 | 2000 Ford Focus

2 Answers

F150 2004 blower working only on high position.


this is because your blower motor resisters are burned out for speeds 1,2 & 3. High speed does not have a resister.

Replace the resister. If it goes a 2nd time, it is because your blower motor is failing & drawing too much current.

it is behind the glove box I think. It is in the plenum case where air blowing on it keeps it cool.

Easy repair. May need to access throught glove box which should open all the way down when you squeeze the sides in.

Go to tascafordparts.com for a discounted resister.
Please rate as solved problem if this is what you needed.

------------------------------------------------------------------------------
Manual Climate Control System Outputs
Blower Motor Switch Resistor
Blower Motor Resistor Coils 9ba1105.gif Blower Motor Thermal Limiter 47afe58.gif The heater blower motor switch resistor has the following features:
  • The assembly is located on the passenger side of the plenum assembly behind the glove compartment (06010).
  • Three resistance elements are mounted on the resistor board to provide four A/C blower motor speeds.
  • Depending on the heater blower motor switch position, series resistance is added or bypassed in the A/C blower motor circuit to decrease or increase A/C blower motor speed.
  • An overheating protective device (thermal limiter) will open the resistor coil circuit when the temperature reaches 121°C (250°F), interrupting the blower motor operation in all speeds except HI.
  • The thermal limiter cannot be reset and is not serviceable.

Mar 23, 2009 | 2004 Ford F150

Not finding what you are looking for?
2005 Ford Focus ZX4 Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...