Question about 2001 Hyundai Santa Fe
2.7L - 6cyl
Put all the caps on finger tight, then start from the middle and work your way outwards torquing the caps in three stages
Posted on Mar 03, 2019
Usually cam caps have a number on them, or when removed put in order you took them off.
Posted on Mar 02, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
crank sensor is a component used in an internal combustion engine to monitor the position or rotational speed of the crankshaft. This information is used by engine management systems to control ignition system timing and other engine parameters. Before electronic crank sensors were available, the distributor would have to be manually adjusted to a timing mark on the engine.
The crank sensor can be used in combination with a similar camshaft position sensor to monitor the relationship between the pistons and valves in the engine, which is particularly important in engines with variable valve timing. It is also commonly the primary source for the measurement of engine speed in revolutions per minute.
Crank sensors in engines are usually comprised of magnets and an inductive coil. They are principally based on the Hall effect. Common mounting locations include the main crank pulley, the flywheel, or occasionally on the crankshaft itself.
Some engines, such as GM's Premium V family utilise crank position sensors which read a reluctor ring integral to the Harmonic Balancer. This is a much more accurate method of determining the position of the crankshaft, and allows the computer to determine within a few degrees the exact position of the crankshaft (and thereby all connected components) at any given time.
Posted on Dec 27, 2008
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
This is from the factory service manual of your car:
There is no onboard programming procedure for this vehicle. This vehicle requires special equipment be connected to the vehicle to program the keyless remote. Translation you need the dealer to do this.
Posted on May 22, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
Tips for a great answer:
Oct 26, 2017 | Hyundai Cars & Trucks
Feb 14, 2017 | 2011 Hyundai Santa Fe
Nov 02, 2015 | Hyundai Cars & Trucks
Mar 26, 2015 | 2005 Hyundai Santa Fe
Apr 24, 2014 | 2003 Hyundai Santa Fe
Oct 05, 2013 | 2005 Hyundai Santa Fe
Mar 02, 2011 | 2001 Hyundai Santa Fe
Oct 08, 2010 | 2004 Hyundai Santa Fe
Jul 03, 2009 | 2004 Hyundai Santa Fe
Apr 20, 2017 | 2001 Hyundai Santa Fe
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: