Question about Hyundai Cars & Trucks

2 Answers

Hyundai elentra 2012 front passenger wheel dragging (making noise) going forward but does not do this going backward. Only this one wheel.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Contributor
  • 33 Answers

Not too sure what you mean by dragging but check your brake pad thickness and that your sliding caliper housing bolts are greased and caliper is tight.
If noise continues, check with the dealership if all campaigns were carried out. The Elantras did have an issue with spacers on the end of the cv joint stub axles

Posted on Mar 01, 2019

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Most Likely has to do with brakes.
Stuck Caliper possibly or just worn pads.

Posted on Feb 25, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: Passenger side "clunk" from front wheel while turning

Check your sway bar link kit and sway bar bushing also check control arm on passenger side . It could be one of them , they can make noise if they are worn out . It happened to my car too and I fixed the problem.

Posted on Jan 08, 2009

  • 2920 Answers

SOURCE: I Think I have a front wheel bearing problem

yes it has and you need to change it before the wheel flips on you

Posted on Jan 20, 2009

  • 740 Answers

SOURCE: I Think I have a front wheel bearing problem

Check wheel bering for play if there is no play , it doesn't mean that bearing is NOT bad its can still be dry and would be making that grinding sound you described Also check axle and see if boot is broken. That may be your problem also make sure that rotors are not gouged/scraped up and pads are good.Contact if you need more help and thanks for using FIX YA

Posted on May 05, 2009

SOURCE: My tacoma makes a loud roaring noise while I am

have your wheel bearings checked out. sounds like a wheel bearing going bad, if you said it gets worse when turning right have your left wheel bearings checked for wear. weight transfer will put more strain on the bearings and make them louder.

Posted on Aug 16, 2009

  • 3 Answers

SOURCE: bmw z3 passenger seat goes forward backwards but

It can also be theseat motor since there is seperate motors for up/down & forward/backwards. You can test the switch to see if you are getting power to the connector on the motor by using a multimeter.

If there is power to the motor, I would remove the motor and give it a tap on the ground. Alot of the time the motor is fine, and the tap will free it up again. If it doesn't work you may be up for a new seat motor. Giving mine a tap solved the issue with mine.

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install front passenger seat on 2012 Hyundai elantra


Removing front seats isn't hard as long as your fitting seats that have the same rail mounts.
There are four bolts. One at each end of the sliding rails. Two front end and two rear end. You will probably have to slide the seat forward for the two rear bolts and back for the front bolts. Some makers might have small trim covers hiding the bolts.

Mar 15, 2018 | Hyundai Cars & Trucks

1 Answer

I have a 2006 chevy equinox and the front passenger wheel makes grinding noises when you turn left and vibrates a lot when going down the road I have got all new tires and I replaced the wheel bearings...


If the axle nut isn't torqed tight enough, it can cause a lot of noise. Also if the brakes are worn out, it will cause a similar noise. The only other thing that comes to mind is if the splash guard is dragging on the brake rotor on the back side.

Jan 25, 2015 | Cars & Trucks

1 Answer

I have an 04 hyundai elantra. When im driving slow (0-40mph) you can hear a grinding noise coming from the front driver side, but when i speed up on the highway or anything there is no more noise. it


This could be the brake pads dragging or it could be a wheel bearing. You can check one or the other. The wheel bearing is tested by jacking up the car with that wheel off the ground and see if you can rock the wheel side to side or up and down. The way to check the brakes is to take the wheel off and look at the brake pads.

Sep 14, 2014 | 2004 Hyundai Elantra

1 Answer

Nissan patrol will not go into low four wheel drive


For 4 Wheel drive related problem,click the link below and go through the troubleshooting procedure:---

Car will not go into 4WD high or 4WD low?

http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

-------------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-----------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html
----------4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html
------4WD light is flashing and beeping? NO 4WD high?
http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html
--------This details will help.Thanks.

Mar 25, 2012 | 2004 Nissan Frontier

2 Answers

Lights or fuse for my speed odemeter guage and heater/air conditioning system


These lights for the dash are controlled by a rheostat instrument control dimmer switch next to the main light switch for the headlights, it is either turned off (have seen this dozens of times) or it is defective. Below is a picture of the switch assembly I speak of. The thumb wheel next to the knob is the dimmer control.



2_13_2012_9_00_33_pm.jpg

Feb 13, 2012 | 2000 GMC Yukon XL

1 Answer

2003 Trailblazer, the front drivers side wheel locks up and won't turn more than half a turn forward then the same backward. Making a bad clunk noise if you try to force it by giving the truck more gas to...


It sounds like a problem within the front differential, possibly broken spider gears. If so broken gear shrapnel may be jamming that wheels output shaft.

Feb 11, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

Hi, I have a 2005 tucson, i applied my handbreak yesterday in my driveway and now it won,t fully release. back wheel is making a noise when i go forward. my question is, do i have to replace it or can i...


YOU NEED TO ADJUST REAR PARKING BRAKE AT THE LEVER.FIRST OF ALL YOU NEED TO BLOCK FRONT WHEELS.THEN RAISE THE REAR OF THE VECHICLE.SUPPORT WITH JACK STANDS.MAKE SURE YOU ARE ON HARD LEVEL SOLID GROUND WHEN USING JACK STANDS.AFTER RAISING THE CAR SET PARKING BRAKE 1 CLICK TOWARD ENGAGEMENT.REMOVE FLOOR CONSOLE.TIGHTEN THE ADJUSTING NUT UNTIL THE PARKING BRAKES DRAG SLIGHTLY WHEN THE REAR WHEELS ARE TURNED.RELEASE THE PARKING BRAKE COMPLETELY.CHECK IG PARKING BRAKES DRAG WHEN REAR WHEELS ARE TURNED.READJUST IT NECESSARY UNTIL THERE IS NO BRAKE DRAG FROM THE PARKING BRAKES.

Apr 20, 2010 | 2005 Hyundai Tucson

1 Answer

Front tire drags


check your cv shaft

Sep 26, 2009 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

84543 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...