SOURCE: valve clearance
Hello, For all 615, 616 (4cyl) and 617 (5cyl) through 1985 model year is:
cold intake 0.10mm or .006in
exhaust 0.35mm or .014in
hot intake 0.15mm or .007in
exhaust 0.40mm or .016in
CYA, Gator241
SOURCE: Valve tappet adjustment
well, I can see ur message has been here for quite some time. Most probably you got the answer to ur request.
I just did the valve clearance on the engine of my SJ413 that has the 1000cc engine of an SJ410 :
When cold: 0.13mm Intake and 0.18mm Exhaust
Engine sounded well and worked fine after that.
Enjoy
Mehdi
SOURCE: Engine tappet clearances
According to http://freespace.virgin.net/tommy.sandham/databook.htm# Rocker Adjustment, the cold clearance is .008" intake/.018" exhaust in the non-GT 1500cc, and .012" intake/.022 exhaust on the GT. Sweet little car!!!
SOURCE: Need Valve clearance for '93 kh ford laser
0.10 - 0.15mm inlet
0.18 - 0.23mm exhaust
but you must be carefull because the top of the valve seat becomes concave from wear, a feeler guage will not give the most accurate reading, hope i have been of some hel
SOURCE: valve tappet clearance of toyota 7k engine
7k clearances are ( HOT ) Inlet 0.008 in ( 0.20 mm )
Exhaust 0.012 in ( 0.30mm)
1,690 views
Usually answered in minutes!
×