2009 Nissan Frontier Logo

Related Topics:

Jaime Oliveira Posted on Feb 22, 2019

Codigo obd p1757 frontier nissan 2009 - 2009 Nissan Frontier

4 Related Answers

Anonymous

  • 521 Answers
  • Posted on Aug 10, 2009

SOURCE: OBD CONNECTION 2000 NISSAN FRONTIER

if the scanner will not communicate with the ECm, First check all the fuses under the hood. If all is well, make sure you have the key on and not off or running. If all is good there then the computer for the car has taken a vacation on you and will need to be taken to the dealership for repair/re-programming.

Ad

Anonymous

  • 142 Answers
  • Posted on Oct 18, 2009

SOURCE: can you tow a nissan frontier 4x4 behind a motor

must have a tow attachement on the frame in the front,go to uhaul,they have the attachements.or nissan

Anonymous

  • 869 Answers
  • Posted on Dec 30, 2010

SOURCE: OBD CODE P0430 ON A 2000 NISSAN FRONTIER, 4 CYL, 5

you need to consult a dealer. one needs to have a look to give u a perfect solution

jturcotte

Jeffrey Turcotte

  • 8991 Answers
  • Posted on Aug 23, 2017

SOURCE: obd-ii ports on 2009 nissan maxima ? where

Engine Light Is On 2009 2014 Nissan Maxima What to Do 2009 Nissan Maxima 3...

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

What are some signs that a speed sensori s bad on a 2003 frontier nissan

fault code is p0500
symptoms
loss of anti-lock brakes the "anti-lock" or "brake" warning lamps on the dash may be lit the speedometer or odometer may not work properly (or at all) your vehicle's RPM limiter may be decreased the shifting of an automatic transmission may become erratic other symptoms may also be present

Read more at: https://www.obd-codes.com/p0500
Copyright OBD-Codes.com

if the engine check light is on
the engine computer has fault codes to be read

this is the speed sensor on a 2003 nissan frontier


26311596-naf0krr2sh2cklw2foo5yreu-4-0.jpg

26311596-naf0krr2sh2cklw2foo5yreu-4-1.jpg26311596-naf0krr2sh2cklw2foo5yreu-4-3.jpg
0helpful
1answer

2009 Nissan Frontier idles and revs fine in park, but, no power in drive?

check your wires and make sure you have a good clean ground. did you do a fuel pressure test after the r&r fuel pump
0helpful
1answer
0helpful
2answers

Can you tow a nissan frontier 4x4 behind a motor

must have a tow attachement on the frame in the front,go to uhaul,they have the attachements.or nissan
0helpful
1answer

Can't get power to trailer cable powerlines on 2009 frontier se

If it's factory installed, there is usually an extra fuse to install in box under hood or in dash.
0helpful
1answer

1998 nissan frontier 4x4

Well since the lights are controlled by the OBD (on board diagnostics), you'll have to reset it. You may be able to do this by simply disconnecting the battery for a few hours. However, a lot of newer vehicles have electronically locked radios which require the manual to be able to be re-enabled.

I'd check out the radio before disconnecting the battery.

The only other ways are to physically disconnect the lights in the dash or get someone with an OBD reader to clear the codes.
Not finding what you are looking for?

50 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...