SOURCE: key fob not working after battery change ford focus 2006
Try reprogramming it.
1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
2. Turn the ignition OFF. The system will chime to confirm programming mode.
3. Within 20 seconds, press any button on first keyless remote.
The system will chime once to confirm programming.
4. Within 20 seconds, press any button on second keyless remote.
System will chime once to confirm programming.
5. Turn ignition to RUN to exit programming mode.
SOURCE: Central locking on my Honda CRV 2001 just stopped working
fob may need to be reset see dealer for this
SOURCE: My 2003 Honda CRV ...drivers side door does not
you may need to replace the door locking actuator, they do tend to go bad over times. does the driver side door lock automatic when using the lock button on the driver side. if you can lock and unlock the driver side door with a switch, my guess would not be the locking actuator, it might be in the remote locking module.
Testimonial: "Thanks for the help. everything relates back to the actuator.."
SOURCE: how do you charge the key fob.. The message on the
The key fob does not get charged. Instead you replace the battery inside the Fob. if you look behind the fob it tells you what battery it needs for replacement. CR2032
SOURCE: Remote Car starter won't work
put your key in the ignition, then remote start it, if it starts, you need to either move the transponder loop of key or reprogram the transponder or take it to a remote starter shop
105 views
Usually answered in minutes!
×