Get rid of that car , that 2.7 L engine is a cash drain .
SOURCE: how to replace driver side mirror on a 2007 chrysler sebring ltd
Once you take of the door panel, you should have two or three nuts behind the black triangler shape cover..Once you take them off, you just reverse the procedure...To take the door panel off, you may need a flat head screwdriver, and a phillip screwdriver..You may have two or three screws to take off..One is by the door handle..One may be under the window switch..which you can pop that off with the flat head screwdriver...Then just pop the panel off, and disconnect all the connections..Should be no more than 3....Goodluck..
Testimonial: "Just what a needed, straight to the point."
SOURCE: 2007 chrysler sebring serpentine belt diagram
Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.
SOURCE: How do I adjust the altrnator drive belt on a 2002
you don't it has an automatic belt tensioer
SOURCE: 2007 Chrysler Sebring, knocked the
This is not hard to replace at all, most of the time the door panel doesnt have to be removed , just the small cover behind the mirror inside the door, the only problem is you must paint the mirror to match the car if its painted, i replace and paint mirrors all the time, buy one online and you will pay about 30.00 for it, heres a picture of it and you will not need to remove the door panel just the small cover that covers the mirroe nuts, the wire plugs in to back of the mirror, this is easy to do,make sure when looking for mirror you get what you have like if its heated or power. heres a picyure of your mirror good luck, and good day.
45 views
Usually answered in minutes!
×