Bmw 2006 325 wont engage shifting - 2006 BMW 325i

If the lever won't move, it's probably the shift interlock. If can move the lever, but it doesn't engage, check the transmission fluid.

did you bleed the system

Service the transmission for the shifting issue. However going from auto to manual is an electrical switch. Car wont shift till car is at high enough rpm level.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/nathaniel_9ed79ef078a2f164

May be a bad Torque Converter Clutch solenoid, or bad torque converter itself.

For the fact that you don't know what is the cause as you bought it like that I think it's best for you to buy another gearbox before you start spending on that gearbox, then you can start deciding on fixing selling or keeping it for spare parts bye bye

Hi:) Inside the transmission their is parts called accumulator pistons and spings that control the amount of force the transmission engages and disengages with Have a mechanic check out the valve body in the transmission and this can be done with out taking the transmission out of the car.

as the temperature gets colder this tends to happen that is why thinner fluid is always better to prevent this from happening try changing your fluid to a thinner fluid. guaranteed better shifting.

pedal lock not disengaging call the dealer explain problem they will tell you the likely causes such as blown fuses

remove the gear shift panel and with super gleu secure the gear indicatop in the correect position

poping out of gear is caused by transmission internal wear, it can be the shift rails or other trans parts like bearings and engagement dogs on drums.