Question about Mercedes-Benz Cars & Trucks
You can look up utube vids on this problem, sometimes there can be a child safety lock system, also you can check this website for items that will help with getting the door unlocked also you can always find anything else you need here at discount prices>>www.discountbargainprices.com
Posted on Feb 15, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I fixed mine by using fine steel wool to clean the brass contacts located at the right upper door frame on the right door as viewed from the rear of the vechicle.
Posted on Mar 21, 2009
go inside, lift on handle, then beat the **** out of the door pounding it like your trapped in it trying to get out. latch mechanism is probably corroded and froze shut. once open, spray with wd40 and work the lever a lot. then get door panel off to see if handle is broken inside
Posted on Jun 17, 2009
SOURCE: bmw door won't open
THE MECHANISM FOR ATTACHING THE HANDLE TO THE LOCK CAN BREAK WITHOUT WARNING. I HAD TO REPLACE MINE LAST SATURDAY. IT IS A DIY JOB IF YOU HAVE THE TOOLS AND ARE COMPETENT. THE WINDOW WINDER MECHANISM HAS TO BE REMOVED AS WELL AS THE GLASS AS MOST OF THE WORK IN REMOVING AND REFITTING THE HANDLE CAN ONLY BE DONE WITH THESE REMOVED. IT TOOK ME ABOUT THREE HOURS AS THE WINDER MECHANISM WAS RIVETED TO THE DOOR AND THESE HAVE TO BE DRILLED OUT TAKING CARE NOT TO HIT THE GLASS WITH THE DRILL BIT. ALSO, THERE IS A SLIDING CLIP WHICH MUST BE PUSHED ACROSS TO REMOVE THE OUTSIDE HANDLE TRIM BEFORE YOU CAN REMOVE THE HANDLE. I DID IT WITHOUT A SERVICE MANUAL, BUT I RECCOMEND YOU GET ONE BEFORE TRYING THIS YOURSELF AS IT PROVED TRICKY. IF YOU DECIDE TO TRY IT, MAKE SURE TO HAVE POP RIVETS AND A RIVETING GUN AS WELL AS FOUR 4.5 MM FLAT WASHERS ON HAND BEFORE YOU START AS YOU NEED THEM TO REFIT THE WINDOW WINDER MECHANISM. ALSO, TAKE CLEAR DIGITAL PHOTOS AS YOU GO SO YOU WILL KNOW WHERE THINGS CAME FROM AND WHAT THE ASSEMBLED ITEMS SHOULD LOOK LIKE AT EVERY STAGE. IT'S NOT ROCKET SCIENCE BUT DOES REQUIRE CARE. LASTLY, IF YOU GET SOMEONE TO DO IT FOR YOU, MAKE SURE THEY KNOW ABOUT THE SLIDING CLIP PREVIOUSLY MENTIONED BECAUSE IF THEY TRY TO PRISE THE TRIM OFF, THE PAINTWORK WILL BE DAMAGED AND THE TRIM WILL BREAK. OH YEAH, BE PREPARED FOR A LARGE LABOUR BILL RELITAVE TO THE APPARENT SIZE OF THE TASK AS IT WILL TAKE TIME NO MATTER WHO DOES IT. GOOD LUCK
Posted on Aug 27, 2009
Is your car door set up to override the lock mechanism if the door handle is pulled?
If it is not set to override, is your door still locked when you use the handle?
If the door is unlocked, is your door latch in the open position when you test the handle?
If open, close the door latch (not the door, just the latch) and pull the handle to see if this releases.
If it doesn't, check to see if all the rods connecting to the latch mechanism and the handles are all in working order
Posted on Sep 08, 2009
Tips for a great answer:
Nov 02, 2017 | Cars & Trucks
Sep 13, 2014 | 2002 Hyundai Santa Fe
Jan 29, 2014 | Land Rover Cars & Trucks
Aug 18, 2011 | 1997 Buick Park Avenue
Jun 22, 2011 | 2002 Ford Escape
Jan 21, 2011 | 1990 Lincoln Continental
Nov 16, 2010 | 2002 Chevrolet Cavalier Coupe
Mar 06, 2010 | 2002 Ford Escape
Aug 22, 2009 | 2001 Mercedes-Benz S-Class
Feb 24, 2009 | 2002 Volkswagen Jetta TDI
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: