SOURCE: oil pressure sending unit
Hi there;
Your looking foer the oil pressure sensor on the 2004 8.1L.
You will find it located directly behind the EGR valve threaded into the block just to the drivers side of the center bolt for the transmission to block connection.
Thanks
Farrout!
SOURCE: 2001 chevy venture oil sending unit
HI..
On a problem with oil pressure sensor leaking.
99% you need to replace the sensor with a new one.
Because if you can see the leak is not for the tread or gasket of the sensor.
If you can disconnect the the wire from the sensor.
and try to start you will see the leak coming from inside on the plastic, where the pins. of the sensor.
OK.. I hope this information work for you.
I work on Cars everyday.
Thank you fo use fixya.
SOURCE: Where is the oil sending unit located on a 2003 Chevy Tahoe 5.3 engine
its in the block behind intake manifold .
SOURCE: Where is oil sending unit on 2003 Chevy Avalanche
It's at the very back of the block, top-center, under the intake manifold.
SOURCE: where is the oil sending unit located on a Chevy S10 Pickup.
MY S-10 IS LEAKING OIL. I WANT TO KNOW WHERE THE OIL SENDING UNIT IS.
41 views
Usually answered in minutes!
×