Not, easy!
The Bulb comes out from the inside of the Trunk
So, you need to remove the Truck lid inside panel (See Video), reach up behind where the light attaches on the trunk lid, twist the Bulb socket out a 1/4 turn same direction ya unscrew a Jar lid and the Bulb pulls straight out (do not turn the bulb in the socket). Installation is reverse of what I just wrote.
See you tube video;
https://www.youtube.com/watch?v=R7vdo_YsARA
SOURCE: how to change the license plate light on 2001 ford focus zx3
Take a thin blade screw driver and gently pry between the rubber seal and the metal and pop the light out, replaced the bulb and pop the light back in. works fine.
SOURCE: REPLACE HEADLAMP BULB 2001 LEXUS LS430
There is a clip that pries up with small flathead screwdriver. The harness and bulb are held in lens with a plastic ring that screws on and off.
Testimonial: "good info "
SOURCE: how do I change the right license plate bulb.
this ones kind of tough for an amateur. You need to pop off most of the little black retainers holding the trunk lid liner on. then theres the emergency handle that you use to get out if your locked in the trunk. you need to pull on the far end of the handle and the outer cover will come off. you may need a small screwdriver to remove it. then pull straight down, really hard and the handle will come off. then remove the rest of the liner. the bulbs are 194a bulbs. available pretty much anywhere. reinstall in the reverse order.
SOURCE: how to replace lexus 2001 ls430 middle tail lamp
CAREFULLY TRY TO TWIST BULB HOLDER COUNTERCLOCK WISE TO REMOVE IT.
bank on right.
1,250 views
Usually answered in minutes!
×