I need a spark plug wiring diagram for a 1988 2.8 liter oldsmobile cutlass Ciera

SOURCE: changed spark plugs and wires now car wont start

I know this might be obvious but the obvious is often the problem. Did you replace the coil wire that goes from your coil to the distributor cap? Also, double check to be sure that your wires are connected in the correct order. A little more clarification might help. Does it turn over? Does it just click? When you turn the ignition key then let off does the car clunk or make a wheezing sound?

SOURCE: Where can I find a spark plug wiring diagram for 1997 3.1l engine

Normally the firing order will be stamped on the top of the intake manifold also the number one plug will be the front one on the drivers side of the car. On the top of the distributor cap you should see a number one that is where the number one plug wire goes follow the firing order on the manifold and go clock wise on the distributor cap

SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera

ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.

Testimonial: "Thank you very much for your advice and time!"

SOURCE: 1995 oldsmobile cutlass ciera wiring diagram

they can be bought on line but the easiest way is to buy a manual from local parts store, or possibly check one out of the local library

SOURCE: 1993 oldsmobile cutlass ciera 3.3 liter need

For the 3.3L (6-cylinders):
Firing Order:
1-6-5-4-3-2
Cylinders
2------4------6
1------3------5
(Front of Vehicle)
Ignition Connectors:
___
o-1
o-4
___
o-5
o-2
___
o-3
o-6
(Front of Vehicle)


Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!