SOURCE: torque settings for big ends on a 97 toyota camry 220sei
On the V-6 it's 25 Nm (18 ft lbs) on the first pull and then you rotate the next pull 90 degrees using a torque angle wrench.
Checking the specifications for the four cylinder:
25 Nm (18 ft lbs) on first pull and 90 degrees
on the second pull using a torque angle wrench.
SOURCE: need torque settings for big end and main bearing
big end - stage one 18-22 Nm. stage 2 40-50 degrees
main bearings stage 1 20 Nm stage 2 90 degrees
SOURCE: i need to know the torque settings for 850cc reliant robin
go to
http://mankymonkeymotors.co.uk/Trikespageimages/relianttorquesettings.html
a target="_new" href="http://www.leafletflyers.co.uk/">Leaflet Distribution in Croydon</a>, Leaflet Distribution in Balham, <a target="_new" href="http://leafletflyers.co.uk/Leaflet-Distribution-Streatham.htm">Leaflet Distribution Streatham</a>.
SOURCE: torque settings for bmw 316
hi for main bearings it is stage 1 : 25nm leave for 10 mins then stage 2 its turn 53 degrees for big end bearings it is stage 1 : 23nm leave for 10 mins then stage 2 its turn 70 degrees hope this helps
216 views
Usually answered in minutes!
×