SOURCE: need to find and replace oxygen sensor for 2003 chevy ventue
Need a 7/8 open end wrench or a o2 sensor socket. Located in exhaust pipe. The one closest to the engine is Bank 1 Sensor 1. The ones located downstream and known as "Sensor 2"
SOURCE: how do you change an oxygen sensor on 2006 chevy aveo
There is a special socket for O2 sensors which allow the wires to stick out and not get twisted up. It's not expensive and available at most auto parts stores. Disconnect the sensor from the wiring harness, with the plug and then use the socket to remove and replace the new sensor. Re-connect electrical plug.
Please rate this answer. Thank you.
SOURCE: location of mass air flow sensor on 2005 chevy
Has to be in the ducting ,after air filter and before throttle body,and will have a wire connector on it.
CRC MAF Cleaner--- only, not brake cleaner
1,209 views
Usually answered in minutes!
×