You need the software to do this ,you cannot even do it with a copy of Delphi .a right pain and I can only suggest that you ask at dealers or a bosch specialist garage .Sorry I cannot give a instant fixya quick fix .
SOURCE: reset oil change indicator 2008 mercedes benz E350
With the key in position 1, hit the odometer reset button on the left on the cluster 3 times in a row. The cluster should beep once. scroll through the multifunction display with the page buttons until the display shows the onboard voltage screen. It will say something like "UB: 12.2 V" scroll threw this menu with with the up/down until you reach the "service menu" page. scroll down to "confirmation" press +, confirm full service with +. Wait till it says service confirmed. cycle the key off and then back on to position 2. Scroll to the normal service menu where it normally says how many days or miles till next service. If the service was reset correctly, it will say "service display not possible" for a few minutes while it recalculates. You must cycle the key off and back on before it will back out of the onboard diagnostic mode. If you dont back out, the esp/abs/bas lights will illuminate when the car is started
SOURCE: Mercedes 2007 E350, oil change frequency?
depending on the pollution in your area. two to three thousand oh yeah keep in mind synthetic oil is far superior, to non synthetic.
so pic a good oil.
hope2help shack
SOURCE: how i can reset the e service light on my 2006
Sorry to say, but there are only two ways to reset this light,
One is to buy a service light reset computer.
The other is to get it serviced at a registered dealer.
The second option is the cheapest.
SOURCE: oldsmobile intrigue 2000 coolant light will not go
The coolant level sensor is not on the radiator on this vehicle!! The level sensor is beneath the coolant reservoir. Replace the entire reservoir, rockautoparts.com has it for $60 new and includes the sensor!!
221 views
Usually answered in minutes!
×