Question about Dodge Cars & Trucks
You will have to change the engine wire harness also the ecu and the body control module plus you might have to do some welding for the engine mounts to fit. i just did a swap i put a 5.2 in a durango 02 that came out of a 98 durango much more work than i thought it takes a minute and by minute i mean days and i still am running into security issues
Posted on Feb 04, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You can buy adaptor plugs that allow a simple hook up at most car stereo places. However, when you increase the power going to the speakers you also have to replace the speakers to handle the higher power or you'll toast them.
Posted on Apr 01, 2009
SOURCE: egr valve dodge durango
if this is a 4.7l engine, the valve is on the left rear of the intake. loosen the 8mm bolts that hold the egr intake tube to the egr valve, remove the egr bolts, disconnect wiring, remove valve and tube together, attach intake tube loosely to new valve, install new valve, tighten tube bolts to egr using a swivel socket, this is not a 5 minute job, so dont attempt unless you have some time and patience.
Posted on Apr 24, 2009
SOURCE: 2005 Dodge Durango
The p0300 What does that mean?
Basically this means that the the car's computer has detected that not all of the engien's cylinders are firing properly.
A P0300 OBD DTC code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-
The p0430 What does that mean? Basically this means that the O2
downstream of the catalytic converter on bank 2 is detecting that the converter is not working as efficiently as it should be (according to specs). It is part of the vehicle emissions
Posted on Apr 26, 2009
Go to the dealer. It is the only way, they have to use a computer. Changing the battery doesn't make it lose it's program though. You most likely broke the battery hold down. This is the most common thing I see at my shop. If the key still starts the vehicle, you now have a bad key fob. If not, you may be able to get it reprogrammed.
Posted on Aug 05, 2009
Tips for a great answer:
Sep 11, 2016 | 2001 Dodge Durango
Jan 15, 2016 | 2002 Dodge Dakota Club Cab
Dec 12, 2015 | 2005 Dodge Dakota Club
Nov 02, 2015 | Dodge Cars & Trucks
May 31, 2015 | Dodge Ram Cars & Trucks
Feb 20, 2013 | 2003 Dodge Durango
Jun 18, 2012 | 2005 Dodge Durango
Mar 28, 2011 | 2001 Dodge Durango
Feb 08, 2011 | 2005 Dodge Ram
20 people viewed this question
Usually answered in minutes!