Question about Lexus IS 250
I got this free Pdf manual from an online store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the all the times I fixed the chipper in these 4 years
Posted on Jan 30, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: audi a4 2.8 30v 1998 ack engine
It is mounted to the transmission bellhousing on the driver's side. The connector is mounted on the firewall and is a smaller, gray connector. You can reach the sensor from underneath.
Posted on Apr 01, 2009
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
Posted on May 06, 2009
SOURCE: crank angle sensor location
The crank sensor is always located next to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft pulley.
Posted on May 23, 2009
Hi, at the front of the crankshaft. if its near time for the timing belt, you want to replace it along with any pullies, tensioner and water pump
The crankshaft position sensor is mounted on the engine near the crankshaft.
The crankshaft position sensor is a Hall-Effect sensor that senses the crank angle (piston position) of each cylinder and converts it into a pulse signal. The signal from the sensor is relayed to the ECM to indicate engine rpm and the position of the crankshaft.
Removal & Installation
Temperature - 4°F, test specification 1500-1700 RPM Temperature 32°F, test specification 1350-1550 RPM Temperature 68°F, test specification 1200-1400 RPMTemperature 104°F, test specification 1000-1200 RPM Temperature 176°F, test specification 650-850 RPM
Posted on Mar 16, 2011
Tips for a great answer:
Nov 25, 2016 | Mitsubishi Cars & Trucks
Jan 27, 2016 | Lexus Cars & Trucks
Mar 03, 2014 | Cars & Trucks
Feb 09, 2012 | Nissan Pulsar Cars & Trucks
Dec 19, 2010 | 2002 Mitsubishi Lancer
May 23, 2009 | Nissan Cars & Trucks
Oct 28, 2008 | 2002 Chrysler PT Cruiser
Aug 01, 2008 | 2002 Nissan Altima
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: