For heavy machinery cars etc. luckily there are many websites
that can help you repair
for eg site like reliable-store is very active in this.. instant help, emails and all that's fantastic
SOURCE: My 6 month old Subaru Tribeca won't start
You wouldn't expect these things to happen in a brand new car! But sometimes its good for the manufacturer as they can modify parts and launch field fix programs or recalls. For you particular case I think you should ask the dealer the results of the scannings and post it here so that we can use the information you provide us to better our services and knowledge.
Thank you.
SOURCE: I need the location of MAF sensor in a 1998 Dodge
Your vehicle dose not have a maf sensor. They used a map sensor it is on the engine located under the front of the breater where it attaches to the engine.
SOURCE: 2006 subaru B9 Tribeca Error 66
Hello, I know exactly what your talking about! and why no one else
did... The error code is being displayed on your trip/odo LCD screen at
the bottom of your right gauge pod if I remember correctly. Only, it\'s
not Er 66... it\'s (Er bb) which is a malfunction with your vacuum pump
system. I truly hope this is the same concern you are asking about, if
so I am happy I could help. If it is a different problem please let me
know so I can look into this matter further. I\'ve added an "error
chart guide" so you will have proof this time when/if you decide to
return to the dealer... Good luck!! and I hope this info
helps...(subytech1)...
SOURCE: subaru tribeca lights
DO NOT buy bulbs anywhere other than SUBARU as replacement. They are specifically long life bulbs. Yes, availlable in other brands in other stores and more cost efficient but not in the long run..
SOURCE: my 2008 uses a ton of oil also
CHECK FOR OIL LEAKS AROUND TIMING COVER.FRONT CRANK SHAFT SEAL COULD BE LEAKING.OIL FILTER NOT ON TIGHT OR ITS SEAL DAMAGE WILL LEAK.REAR MAIN OIL SEAL LEAKING.CHECK UNDERNEATH CAR YOU GOT A LEAK SOMEWHERE.ENGINE TOO YOUNG TO BE BURNING OIL.
behind the light, you can locate the position by following the wires
which actually connect to the bulb assembly. The bulb assembly ought to
be removable with a 1/4-1/2 turn and pull motion. Be sure to not touch
the replacement bulb with your bare hands. Your Subaru service ought to help you with this and not charge you......
164 views
Usually answered in minutes!
×