3.0 automatic, oil and filter changed and a new fuel line put on,& transmission fluid dipstick reads full .
SOURCE: Transmission -1997 Grand Cherokee laredo 4x4
Sounds like the lockup torque converter has failed. Repair requires trans removal and possible rebuild if converter has contaminated unit. Have a trans shop verify!!
SOURCE: hyundai excel 1996 automatic will engage reverse
It appears you have a Forward Clutch FAILURE. Replace the trans after you get it diagnosed and verified by a professional technician. By the way, do you have a Check Engine light? If so, what is the diagnostic code? The dealership can scan the system and find any codes which may have been stored in the TCM (Transmission Control Module). If there were any 'Incorrect Gear Ratio" codes, it's most probably the trans itself.
SOURCE: ford transmission ado 4 speed will not change gear
is your linkage Bent to the transmission ?
Or perhaps something under the boot obstructing from engaging into gear
SOURCE: Have a 1997 2.2L Chevy Cavalier automatic. The
Does it feel like the shifter cable is actually moving the detent in the transmission? I've seen a broken shifter cable in a cavalier a while back with the same symptoms you described. Check the cable where it connects to the transmission. It's under the hood on the drivers side.
SOURCE: My 1997 Plymouth Breeze has
Im hoping this is only a loose drive belt ck the belt tension by moving it up and down you should only have 1/4 play on the belt more than that you belt is loose
86 views
Usually answered in minutes!
×