Question about BMW Cars & Trucks
It turns off the electronic suspension in order to srvice on a lift. Leave on unless lifting wheels not the frame.I hope this helps, take care.
Posted on Jan 08, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: passkey of the bluetooth
I HAD THIS SAME ISSUE. I TOOK OUT THE REAR PANELS INSIDE THE TRUNK. FIRST, START WITH THE LOWER CENTER PANEL RIGHT WHERE THE LOCKING LATCH IS LOCATED. THEN, MOVE TO THE LEFT PANELS ON THE SIDES OF THE INSIDE OF THE TRUNK. ONCE YOU HAVE TAKEN OUT THE PANELS, THERE'S A SILVER BOX IN THE TRUNK WITH A "PK 0000" NUMBER PRINTED ON A STICKER. THAT "PK" NUMBER IS YOUR CODE.
IT'S NOT AS BAD AS YOU MIGHT THINK TO TAKE OUT THE PANELS, I DID IT IN ABOUT 15 MINUTES. JUST TAKE YOUR TIME AND THEY ALL GO BACK IN AS EASY AS THEY CAME OUT. JUST TRY NOT TO FORCE ANYTHING BACK IN IT'S PLACE.
HOPE THIS HELPS. LEONARD-
Posted on Apr 26, 2009
check inside the center console i think there is a lock and unlock button for the trunk make sure it is unlocked then try it with the remote.
Posted on Jun 14, 2009
SOURCE: Reset the service light after
BMW insp. reset
- Iginition OFF (POS 0)
- Press and Hold the trip odometer button while turning key to position 1 (ACCESSORY)
- Keep the button depressed (about 5 secs.) until you see "Oil Service" or "Inspection" with "Reset" or "Re" in the display
- *Note: On vehicles with "High" cluster, you will also see the amount of fuel (in litres) remaining until next service
- Press the button again and hold for approx. 5 secs. until "Reset" or "Re" flashes
- While the display is flashing, briefly press the button again to reset the Service Interval. After the display has shown the new interval you should see "END SIA" for about 2 secs.
Note that if the "Reset" or "Re" does not flash, then you have not met the minimum consumption level and cannot reset.
Posted on May 31, 2011
SOURCE: My Battery is completely dead.
You do not need to access the battery to jump start your 7 Series. There is a metal terminal under the hood for jump starting your car or jumping another car. It is located near the passenger at the rear and has a red cap with a PLUS symbol on it. Remove the red cap and attach the postive side of the cable. Attach the negative side to the large nut just to the left.
Also, to open your trunk manually insert the metal key in the key hole next to the button that you push above your license plate.
Posted on Nov 07, 2011
Tips for a great answer:
Oct 15, 2014 | 2008 BMW 750Li
Feb 07, 2013 | 2007 BMW 750Li Sedan
Apr 20, 2012 | 2007 BMW 3 Series 328i
Dec 22, 2010 | 2006 BMW 750Li
Nov 13, 2010 | 2007 BMW 750Li Sedan
Apr 28, 2010 | 2007 BMW 750Li Sedan
Mar 31, 2010 | 2006 BMW 750Li
Feb 06, 2009 | 2007 BMW 750Li Sedan
Jan 20, 2009 | 2004 BMW 7 Series
19 people viewed this question
Usually answered in minutes!