Cars & Trucks Logo

Related Topics:

H
H Scott Baldwin Posted on Dec 27, 2018

2018 Toyota Highlander, passenger's seat does NOT have vertical height adjustment. I bump my head getting in everytime. Is there anyway to replace the passenger seat with one that I can lower?

5 Related Answers

Anonymous

  • 2336 Answers
  • Posted on Nov 10, 2008

SOURCE: Seat height

before spending money on a new sit contact the dealer and see if there is a lowering kit for it. I have just lower my wifes 2007 vulcan 500 by 2 inchs. or talk to www.scootworks.com there are really great there

Ad

Anonymous

  • 292 Answers
  • Posted on Apr 04, 2009

SOURCE: Want to lower the seat height.

best go with a lowering link to drop the rear end a little. there is not much seat there in the first place for anyone to make a thinner one, other than getting a race use seat unit. http://www.mpsracing.com/products/Spencer/Links.asp

Anonymous

  • 94 Answers
  • Posted on Jun 08, 2009

SOURCE: SRS light in board switched on - anyway to reset

the light is on because there is a failure in the system look under the seat for an unplugged connector or a torn wire if you find a problem and fix it you can erase the codes by disconnecting the battery for several minutes but this will erase everything or you may be able to have autozone reset the light after the problem is fixed keep in mind if u try and reset the light without fixing the problem the light will just turn back on

Anonymous

  • 467 Answers
  • Posted on Jul 30, 2009

SOURCE: My sun visor wont stay up. Everytime I hit a bump

the retension spring is weak, it cant be fix, have to replace it, check the dealer or your near by salvage yard.

Anonymous

  • 9 Answers
  • Posted on Mar 07, 2010

SOURCE: lower for height adjustment?

There isn't necessarily an adjustment on all bikes. You can drop the ride height by adjusting the tension on the spring on the rear shock and lower the front end by moving the forks up in the clamps on most makes and models.

Testimonial: "thank u"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2018 Toyota Highlander XLE. Winshield washer nozzle passenger side, weak fluid streams. Driver side works fine.

I moved you to closest forum year.
the nozzles bad, mine too fail on my jeep every 5 years.
cheap plastic fails. or simply clogs up.
it's made of block of plastic with big hole hose
and very tiny Orifice hole to squirt, no turbo's here (LoL)
we replace them , I keep spares in the glove box.
It can be cleaned out with care fuse of sewing needed.
toyota sells them on there parts pages for this exact car.
can be order on line after p/N is found.
easy/.
0helpful
1answer

How to adjust headlights of a 2009 Dodge Journey

thay were installed incorectly remove the bulbs and make sure there seated properly in the head lamp then recheck to see if there in alignment if not there should be adjuster screws on the lamp one for horizontal and one for vertical
0helpful
1answer

Adjust headlights on 07 Honda Ridgeline

i presume you are posting HONDA to a Toyota forum?
how to, who can, what are specs. what is the question?
what country?
double posted too.
the FSM covers this, and the rules vary by country.
some are auto adjusting. (Europe)(complex rules)
others have L/R -U'/D adjustment and others only up/down

USA HL ADJUST.
less photos from FSM .
  1. Park the vehicle on a level surface.
  2. Make sure the tire pressures are correct.
  3. The driver or someone who weighs the same should sit in the driver's seat.
  4. Clean the outer lens so that you can see the center of the headlights.
  5. Park the vehicle in front of a wall or a screen.
  6. Turn the low beams on.
  7. Determine if the headlights are aimed properly.
  8. Measure the vertical adjustment height of the headlights (A). The lights should reflect 2.1 in (52 mm.) below headlight height (B).
  9. If necessary, open the hood and adjust the headlights by turning the vertical adjuster.
  10. end
0helpful
1answer

Passenger side seat warmer does not work

Is the blower under the seat coming on?

Compare both seats & listen for blower

Without the factory manuals your off
to a dealer.

That is something you should have started in august,
as the seat may have to come out
5helpful
2answers

2002 Toyota highlander passenger brake light not working

RE: 2002 Toyota Highlander 2.4cyl. 4X4 Base Model

I am a Certified Technician and have basic knowledge with electronics in electrical wiring. I searched the web and discovered this is a common problem.

I fixed the problem and it was a simple procedure... The problem is with the reverse light socket at the side with no brake light. This socket functions as a hub to direct current to the brake bulbs.

Remove reverse light socket and re-seat bulb. Check for loose or broken prongs. Replace if necessary.

Swap the reverse socket with the other side.
2helpful
1answer
2helpful
3answers

With the rear windows down my Highlander vibrates heavily.

Inspect the universal joint. See if the driveshaft has any play in it. This could also be caused by a bad, dry, or damaged wheel bearing. Those items can be fixed. Hope this helped.
2helpful
1answer

I have a 2007 Highlander, 6 cyl. Are the spark plugs easy to get to ?

the 6 cylinder is usually fairly easy to replace. Might need elbow and extension for this. Some of these vehicles have the spark plug wrench in a bag under rear passenger seats.
1helpful
1answer

How do you adjust the headlight of a 2005 Honda Odyssey?

I assume you are talking about a vertical adjustment.

If so Easy enough. Park the car about 25 feet from a wall or so. This is normal range for adjustment. Turn on your low beams.

Now Pop the hood and take a look at your headlight On You will see a black rubber bump stop. This is used to adjust your hood height.

Right behind that you will see a area where you can insert a screw driver into. Turn that with the screw driver and the headlight vertical angle will change

Here is a picture
[IMG]http://i67.photobucket.com/albums/h298/JDMITRCinci/RJAAI003_204.png[/IMG]
5helpful
1answer

Head / fog light adjustment

on each headlamp assembly, there will be either one or two plastic nuts that you can turn.

If you only have one nut on each, that will adjust the vertical aim of the headlights.

If you have two nuts on each, one will adjust the vertical and the other will adjust the horizontal.

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Not finding what you are looking for?

324 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...