SOURCE: PEUGEOT 406 LX DT 1998 2088 CC CLUTCH SLAVE CYLINDER
I understand these cars have a sealed clutch system. When they fail you replace the whole kit master,hydrolic pipe and slave (comes in one piece). Search on ebay maybe £45 or so.
SOURCE: 95 mazda b4000 slave cylinder bleeder valve location
the nipple sticks out side the bell housing on the left side just above your hydralic line for your clutch,auto zones web has a complete diagraham and steps for bleeding
SOURCE: put in new clutch and slave cylinder. no clutch pedal. how do you bleed the cylinder?
work it back and forth with your hand and you will get pedal after a while then bleed like you would brakes get help so one can pump and the other can bleed
Slave cylinder should be on the left side of the bellhousing (follow the line from the clutch master if necessary) If you don't see fluid but you have lost some, also check where the rod from the pedal goes through the firewall to the master...they often leak there and will not drip on the ground.
SOURCE: How do I bleed the clutch slave cylinder on my 2005 VW Jetta 2.5L
the clutch and brake resevoir are all in one.
339 views
Usually answered in minutes!
×