Question about Mercedes-Benz Cars & Trucks

Open Question

2010 GL450 Multifunction display screen has a squiggly line in it. It started when My Service C reminded me for an oil change. was able to reset the full service command, the line didn't disappear.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
GIBBO68
  • 17 Answers

SOURCE: Want to reset the service indicator after changing the oil and filter

HI NO NEED FOR HI TECH GIZMOS HERE ARE YOU SITTING COMFORTABLE....IGNITION IN OFF POSITION, PRESS AND HOLD MILEAGE RESET BUTTON ,TURNING THE KEY ONE CLICK STILL HOLDING IN THE BUTTON.HOLD FOR ABOUT 5 SECONDS TILL YOU SEE OIL SERVICE OR INSPECTION WITH RESET OR RE IN THE DISPLAY,PRESS THE BUTTON AGAIN ROUGHLY 5 SECONDS UNTIL RESET OR RE FLASHES,WHILE THE DISPLAY IS FLASHING PRESS BUTTON AGAIN VERY BRIEFLY TO RESET THE SERVICE INTERVAL.AFTER THE DISPLAY HAS SHOWN THE NEW INTERVAL YOU SHOULD SEE (END SIA)FOR ABOUT 2 SECONDS AND THERE YOU GO JOB DONE IT WORKS ON MINE EVERY TIME I HOPE THIS HELPS,,,,,,,,,, WELL OFF YOU GO YOUVE GOT MONEY TO SAVE ;-)

Posted on Jun 18, 2008

Ad
  • 5 Answers

SOURCE: service reminder

You can reset it manually. Make sure the car is off, then click the ignition over to ON (do not turn over the engine). Press the INFO button until you see the service reminder (should be a wrench with 3 dashes by it). Once you see this, press and HOLD the INFO button for 3-5 seconds. The reminder should add 6 months and 5000 miles.

Posted on Nov 19, 2008

  • 106 Answers

SOURCE: reset oil change reminder procedure

it should be in the owners manual double check manual and should let you know how to reset oil light!!! this may help?

Posted on Mar 24, 2009

  • 323 Answers

SOURCE: reset oil change reminder procedure

Press the "step" button until the oil change interval comes up then press and hold "reset"

Posted on Apr 21, 2009

  • 1 Answer

SOURCE: 1999 Mitsubishi Mirage, how does one reset service reminder light

I own the exact same model of car and most of the time when that light comes on, it is usually due to some type of scheduled maintenance I forgot.

Most commonly it is fouled spark plugs or dirty injectors. I change the plugs and wires every 25000 miles or so, and run a couple shots of fuel sytem/injector treatment through before I take it to a shop. Clears it up almost every time.

Also, you can go to Jiffy Lube or Advance Auto parts and they will do a code read on your vehicle for free so you don't have to pay the dealership $100 just to tell you why it is giving you a check engine light. Don't let them clear the code though unless you are absolutely sure that the problem is fixed or will not reoccur.

If it is something serious, the shop will need the trouble code information to diagnose and repair the vehicle. The mirage is pretty durable so as long as your vehicle is still running smoothly (barring normal wear and tear) the chances of it being something major are slim.

Another way to clear the code that I would NOT recommend is:
1) Disconnect the battery terminals from the battery and touch them together.
2) Leave them that way for about 20 minutes to drain the residual charge out of the on board diagnostic system.

This resets the code light, but it also resets all of the automatic calibration the computer does. You will find that your car will run poorly and die every time you come to a stop until the computer can readjust your idle and fuel/air mixture.

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A-5 service for a 2010 Mercedes glk 350what is it.


That is your 44,000 mile checkup. It includes: oil and filter change, battery test/service, starting/charging system test, lubrication service (door strickers,hood hinges,seat slides and sunroof tracks, cooling system pressure test and inspection, bulb inspection int and ext, inspect/adjust windshield wipers, rotate tyres,check pressures/abnormal wear, check undercarriage for wear/debris, add moa motor oil additive, brake system inspection fluid/pads..rotor condition and lines, visual inspection of suspension and steering components, road test, reset service reminder light

Call your preferred Mercedes dealer to set up an appointment!

Mar 07, 2015 | 2010 Mercedes-Benz GLK 350

1 Answer

On the screen i get service overdue what dose that mean???


The "service overdue" is a mileage based service reminder. It means you need to change the oil and perfirm whatever other service is recommended for your mileage. If you're up on all your service and the reminder is there it's very likely that whoever did the service didn't reset the reminder. Here are a few instructions on how to reset the reminder yourself: http://forum.bmw5.co.uk/topic/48051-how-to-reset-service-due-indicator/

Jan 10, 2013 | 2010 BMW 520i Touring

1 Answer

How to reset service reminder alarm on Toyota aurion 2008?


I am not familiar with that model but most Toyotas reset like this. Tune the key off. Pess and hold the odo/trip reset button while you turn the key to the run position (do not start the engine). The odometer should change to all dashes which will disappear one at a time then change to all zeros and then back to the mileage. Release the button as soon as the mileage is displayed. Sometimes the trip A needs to be displayed before you turn off the key to start. Your owners manual should have this info as well.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Aug 07, 2012 | Cars & Trucks

1 Answer

Coil not reset odo after oil change please let me know how I can reset


1 Turn key in electronic ignition switch control

unit to position " 1"

2 Press the system select button (S110s3)

repeatedly until the basic display (kilometer

reading display or temperature display) is

shown in the multifunction display (A1p13)

3 Briefly press trip odometer reset button (A1s3) 3


i A signal tone sounds and the voltage

times. display appears in the multifunction display

(A1p13).

4 Press lower scroll forward/back button (S110s1)


i The "Service menu" appears in the

multifunction display (A1p13).

5 Press buttons + and


-, setting of specific

functions and volume control (S111s1)

repeatedly and select "Confirmation" menu item

6 Press lower system selection button (S110s3)


i "Confirmation" appears in the multifunction

to confirm. display (A1p13) and the menu item "Complete

service" is shown against a sight bar in the

background

7 Press lower system selection button (S110s3)


i "Service confirmed" appears in the

to confirm. multifunction display (A1p13).

8 Press the upper system selection button

(S110s3) repeatedly until the "Service menu" is

shown in the multifunction display (A1p13)

9 Using the + and


-buttons, setting of specific

functions and volume control (S111s1) select

the menu item "Special work"

10 Press lower system selection button (S110s3)

to confirm.

11 Using the + and


-buttons, setting of specific

functions and volume control (S111s1), select

menu item "Service 3"

12 Press lower system selection button (S110s3)

to confirm.

13 Select the button + and


-, setting of specific i "Standard oil" or "Oil quality 229.5".

functions and volume control (S111s1) select

the specification of the engine oil used

i


If only one oil quality is approved for the

engine, no oil selection is possible.

14 Press lower system selection button (S110s3)


i The message "Item confirmed" appears in

to confirm. the multifunction display (A1p13).

Copyright DaimlerChrysler AG 10/10/06 G/09/06. This WIS printout will not be recorded by the update service. Page 1

15 Press the upper system selection button

(S110s3) repeatedly until the basic display

(kilometer reading display or temperature

display) is shown in the multifunction display

(A1p13)

16 Turn key in electronic ignition switch control

unit to position " 0"
Copyright

Jun 22, 2012 | 2006 Mercedes-Benz R-Class

1 Answer

What is a Wrench light indicator in my 2008 honda Civic


The wrench light indicator is a reminder that you are do for your next service(For example:oil change, air filter change, trans fluid change and so on) base on the miles on your car. A lot of people just get a oil change and have the light reset. If you read your car manual book it will tell you what service you need to do. Note: light come on every 3,000 miles and you can reset any time you want.
How to reset light:
1.with headlight off, turn the key on. Do not start the car.
2. On the left side of th dash below the heat vent there is a button that says "sel reset". push that button until you see "oil life" and a percent on the gauge display screen.
3.Now while on the oil life display, push and hold the "sel reset" button until screen start to flash. you might have to hold for 45sec.
4.when the screen start flashing, release button and hold it down again. might have to hold for about 45sec.

if you did it right the percent should go up to 100% and the wrench light should go out.

Dec 23, 2010 | Honda Civic Cars & Trucks

1 Answer

When I start the vehicle, there are several beeps and then ''Perform Service'' is displayed for a few seconds on the screen (then goes off). The car didn't come with a manual so I'm not sure what type of...


This is a "reminder" chime to let you know to change the oil. It is set to chime after reset and 3000 miles. It is not connected to the condition of oil, just a timer. When it goes off again just hit the reset button. Probably need to change your oil and then hit the reset button.

Jul 22, 2010 | 2000 Jeep Grand Cherokee

2 Answers

Perform service jeep grand cherokee 2005 this message is appearing in the message center


Actually the newer cherokees are a little more complicated, it's not a reminder for an oil change. It is for an emssions service that should be performed according to the dealer. Here is the rest procedure

Turn ignition to on position, but do not start.
Depress brake pedal fully twice.
depress excellerator very slowly twice
Turn ignition off & that will reset the perform service indicator.
I am mechanic & we are getting frustrated because the dealers do not want to release this info to anyone, they want your money! Can you believe if you did not get them to perform the service they charge you a 1 hour shop rate??

Feb 10, 2010 | 2005 Jeep Grand Cherokee

1 Answer

How do I reset the service reminder on a 2006 c230


Below is the procedure for resetting the service reminder:

  • Switch on ignition.
  • Press the system selection button repeatedly until the total mileage is displayed in the multifunction display.
  • Press the scroll forward/backward button repeatedly until the service symbol is displayed in the multifunction display.
  • Press and hold the reset button for 3 seconds.
  • The multifunction display will show "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH THE RESET BUTTON”.
  • Press reset button to confirm.
  • Switch off ignition.

Nov 23, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

How do I clear the service reminders on an '07 Mercedes S550?


The following process will clear the service reminders on your car. All the best.
  • Switch on ignition.
  • Press the system selection button repeatedly until the total mileage is displayed in the multifunction display.
  • Press the scroll forward/backward button repeatedly until the service symbol is displayed in the multifunction display.
  • Press and hold the reset button for 3 seconds.
  • The multifunction display will show "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH THE RESET BUTTON”.
  • Press reset button to confirm.
  • Switch off ignition

Sep 16, 2009 | 2007 Mercedes-Benz Mercedes Benz SL550

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...