If you have another just like it, take it out and find an exact copy-same thread size and all. Or go to a salvage yard and find another Focus.
SOURCE: how do i replace a passenger side mirror on a 2001 ford focus
Interesting and fairly easy to do. I pried off the black plastic interior trim piece by simply pulling carefully on the end facing the windshield, then pulling at the back end. Came off fairly easily. Once off, I could see the wire connector. The mirror has a short wire which goes through the body of the car and connects to the wire connector which comes from inside the door. I did have to take out the two screws holding the front part of the door panel. This was to weave the wires back through because the go below the top of the door panel through the door body.
Once that was done I found the main screw through a barely big enough hole in the door and took that out.
Once that was off, all I had to do was take out one more screw that goes through the front metal body of the door into the mirror assembly.
It was just a process of weaving the wire back through the door, then I installed the front small screw next to hold the mirror in place, then I put in the big screw that really holds the mirror on, connected the wire back together and put the screws back into the door panel. Snap on the inside plastic piece and you're done.
It took me about 30 minutes or so and I had never done it before.
SOURCE: how to replace wing mirror on my ford focus.
on the inside of the car in the corner of the door is a blck plastic piece remoce that and you should see a couple of screws(think they where starbits last i checked) take those out and then you should be able to remoce the mirror from there.-z
SOURCE: how do i replace a broken wing mirror on ford focus
i rang a local garage if they could fit one, then i asked if was easy enough and they told me how to do it.
SOURCE: How do I replace my Ford Focus drivers wing mirror ?
You have to first remove the door panel, on mine there are 3 screws on the bottom and several clips all around it. After removing the panel you should see 2 or 3 bolt heads right behind the mirror, you need to use an extension and socket to remove them. remove the bolts and pull the mirror away from the door, unhook the wires, or cable and reverse to reinstall the new one, it took me about an hour to replace mine.
SOURCE: 2008 Ford Fusion Wing Mirror Replacement
I checked Ford Focus mirror replacement and it seems to be the same. This is for the manual, unheated mirror.
Remove the mirror cover inside the door - slide a screwdriver behind the cover and pry loose carefully.
Remove the single 10mm bolt and the mirror comes free.
NB. Do not drop the bolt into the door.
441 views
Usually answered in minutes!
×