Battery polarity on a remote key for 2007 Suzuki gv ddis

It is telling you it is oil change time.

https://www.google.com/search?q=oil+light+flashing+on+my+2014+DDIS+diesel+Suzuki+swift

..

ah posting to USA form outside USA
you expect lies or truth?
56 means UK 2006,so why not goto UK suzuki and buy your book as ours is near useless.
see chapter, HVAC

no year GV stated, is this a test of wits?
we are USA forum
with no such car. nor engine.
its a diesel.
1.9L (the decimal point helps)
V6 turbo diesel ,
pre 2001 mazda
after Renault.

google is no help, all posters say, RTM
or call REnault.
our factory book does NOT cover your cars.
ours is USA only
so why not
1: buy your book in your country
2: get service there.

owning cars what alien engines can be not fun.
its no SUZUKI engine.
most of our are v6 gas. (last 10 years)

Remote can be matched manually

no year. lots of GV made.

ok the 2liter. Direct Diesel Injection system (in English )
you lost the operators guide?
that be real bad that..... ouch.
try googling for that book.
or googing for the FSM

you might luck out and all 2011 suz, this reset works.
as stated in the op guide.

I see posts that say , only Suzuki scan tool can reset DDIS.

many cars, GM? you fiddle the key, throttle and trip reset to clear this, but each maker does it different and DDIS , my be different
that petrol gas engines, same year, same car.

here are some popular SUZUK (general) answers
according to the manual:

you have to have the engine off... turn the key to the "ACC" position which is the notch that allows power but doesn't turn the engine... then press the gas pedal fully THREE times within FIVE seconds...

however it doesn't always seem to work



one more post

Sit in the driver's seat of the XL7. Insert the ignition key and turn it to "RUN." Do not start the engine.

2 Press and release the gas pedal three times within five seconds. Watch for the engine oil light to flash, indicating that the system is reset.

3
Turn the key to "OFF" and remove it from the ignition.

Read more: http://www.ehow.com/how_7568941_reset-oil-life-xl7.html#ixzz2grPj04TO





This is incorrect and will not work.

1. Turn the key to the "ACC" position which is the notch that allows power but doesn't turn the engine.
2. The display will read change engine oil soon - hit the display button(i) and the display will read 0% oil life.
3. Hit reset button (the check mark button) for 5 seconds and the display will change to 100 % oil life.
4. It may not work the 1st,2nd,3rd .... attempt , but will work eventually.


To Fix:
go to the oil indicator by pressing the second button. Hold on the tick mark button for 3 seconds. This will reset the remaining percentage to 100%.

at the last resort, pulling battery neg. lug.
this may do it, im not sure, but will also drop radio settings.,etc.

for what country , this is www forum.
but if in USA?
we have the fantastic, alldata dot com
or mitchels !

Suzuki uses up to 53 different engines world wide.
and many diff, diesels depending on your countries smog rules.
post location,
old post, but i do the unanswered.

does anyone know what the diagnostic code P0606 is for a vitara 2Lt 2007

http://cgi.ebay.com/ebaymotors/SUZUKI-GRAND-VITARA-2006-2009-FSM-SHOP-REPAIR-MANUAL-CD_W0QQitemZ170396557991QQcmdZViewItemQQptZMotors_Manuals_Literature?hash=item27ac6d22a7

You can use an oil filter wrench or get a rubber handled wrench that you can open jar lids with and use that instead to turn counter-clockwise to remove. If stuck, jam a screwdriver through it and turn it.