Question about GMC Yukon

Open Question

Dic display on a gmc 2005 Yukon blinking information but that 4 switches do nothing

Information switch, customization button reset button has no affect to the display. Dic shows information in English then switches to French. The display goes thru a cycle of information with no input from the switch

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
robmonroe
  • 67 Answers

SOURCE: Drivers Information Center in a 2005 Chevy Impala

Turn the key to the on position (not start) with the radio off. Wait 10 seconds. Press the "display" button on the radio and hold for 10 to 12 seconds. the radio display will light up . Press "display" and "1" to select functions.

This was not tested or confirmed by me, but my dad has a 2005 Impala and this is what he told me. Let me know if it works or not, and I can try to investigate it more if needed.

Posted on Jun 09, 2008

Ad
  • 1 Answer

SOURCE: DIC

Unless your Rendezvous is Canadian made, you can use the SET button ont he DIC to toggle between English or metric. A Canadian odometer and trip odometer will remain in metric units only. Hope this helps.

Posted on Aug 12, 2008

  • 94 Answers

SOURCE: 2005 gmc yukon xl denali service ride control

it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you

Posted on Mar 16, 2009

  • 1 Answer

SOURCE: DIC not working

2004 GMC Sierra DIC stuck in language select mode. Cannot select any other mode.

Posted on Sep 29, 2009

  • 5 Answers

SOURCE: How do I set my dic on my 2002 Buick Rendezvous to

There are two square buttons on your dash, just to the left of the steering wheel. Press and hold the left until it blinks and it will allow you to set up the languages and such.

Posted on Jul 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to recalibrate the liftgate module to open the lifegte eitherway on 2005 gmc envoy xuv


not sure if this is what you're looking for but hope it helps..
Important: The driver information center (DIC) will display the message See Manual - Tailgate anytime a learn is required except after the installation of a new regulator. When a module is not learned, or in a window fault state, only the window remains functional.
1.Activate the window up switch using the key cylinder or overhead console switch and maintain switch activation for 2 seconds after the window has stalled in the fully closed position.
WARNING
Important: The window may be in any position to start the re-learn, but the up operation must be performed first. 2.Activate the window down switch and maintain switch activation for 2 seconds after the window has stalled in the fully open position.

Mar 04, 2018 | 2005 GMC Envoy

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

2 Answers

98 Oldsmobile Aurora There's a on my Dash it says information center and has the oil fuel speed all that it says low oil is there any way anybody knows how to reset that


Check your engine oil using the oil dipstick located on the engine - you need to add oil to the fill line as shown on the dipstick. You should have the oil replaced regularly (every 3-6 months) and keep your eye on the level if the engine is leaking oil underneath or burning a lot of it.

Mar 08, 2017 | Oldsmobile Cars & Trucks

1 Answer

How can I change language in DIC (to English)?


The radio displays driver information center (DIC) information when it first powers up. The uplevel radio shows the time and outside temperature on the first line of the display, and DIC information on the second line of the display.
There are 3 DIC buttons on the radio.
?€¢
ENTER


?€¢
INFO


?€¢
MENU

Mar 15, 2016 | 2005 Chevrolet Malibu

1 Answer

How to reset the check tire pressure indicator


Using the Driver Information Center (DIC)
Important: After resetting, the tire pressure monitoring (TPM) system requires up to 8 km/h (5 miles) of flat, smooth road straight line driving in each of the 4 speed ranges to complete the calibration process. For further information, refer to Tire Pressure Monitor Description and Operation . If the TPM system does not reset, refer to Driver Information Center (DIC) Switch Inoperative .
  1. Set all tire pressures to the recommended kPa/psi. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label .
  2. Turn ON the ignition, with the engine OFF.
  3. Press the vehicle information button until TIRE INFLATION MONITOR SYSTEM PRESS (down/left arrow) SWITCH TO RESET is displayed.
  4. If the system is being reset due to a low tire pressure condition, press and hold the down/left arrow button until TIRE INFLATION MONITOR SYSTEM HAS BEEN RESET is displayed. If the system is being reset due to a tire rotation, press and hold the down/left arrow button for 5 seconds.
  5. Release the down/left arrow button and TIRE PRESSURE NORMAL is displayed.

Oct 08, 2015 | 2006 Pontiac Grand Prix

1 Answer

Park assist warning came on.


{: ) SERVICE PARK ASSIST The driver information center (DIC) displays SERVICE PARK ASSIST when the park assist module detects a malfunction in the object detection system and sends a request to the DIC for display of the message. The DIC also displays SERVICE PARK ASSIST when there is a loss of communication with the park assist module.
PARK ASSIST OFF The PARK ASSIST OFF message is displayed in the DIC when the park assist system is disabled due to conditions that disable or inhibit the system. The red LED in the rear display, as well as, the telltale in the switch will be lit, notifying the driver the PARK ASSIST system is disabled. The object alarm module requests the DIC via the serial data circuit to display PARK ASSIST OFF when it detects that one of the following conditions is true:
• The object alarm system is disabled through DIC vehicle customization feature. Refer to the Owners Manual for more information. • An object is attached to the rear of the vehicle, such as a trailer, bicycle rack, or hitch receiver. • An object is hanging out of the endgate. • The park brake is not fully released. • The system receives vibrations from a large nearby vehicle or from a heavy equipment such as a jackhammer. In the case of objects attached to the rear of the vehicle such as a trailer, hitch receiver, or a bicycle rack, or objects hanging out of the endgate, the rear parking assist (RPA) will have an Automatic Object induced disable feature where the RPA will determine if the rear object is moving with the vehicle. If the RPA detects such a condition, the park assist will be disabled. The PARK ASSIST OFF message will continue to be displayed until the trailer hitch receiver is removed and the vehicle is driven forward above 24 km/h (15 mph).

Feb 07, 2011 | 2007 GMC Yukon Denali

1 Answer

How to change languages on instruments


{: ) Press the customization button (the button on the steering wheel with a bold letter i ) until LANGUAGE: ENGLISH appears in the display. To select your preference for display language, press the select button (bent arrow symbol) while LANGUAGE: ENGLISH is displayed on the DIC. Pressing the select button will scroll through the following languages: • ENGLISH (default) • FRANCAIS (French) • ESPANOL (Spanish) Choose one of the available options and press the customization button while it is displayed on the DIC to select it and move on to the next feature.
If you accidentally choose a language that you do not want or understand, press and hold the customization button and the trip information button at the same time. The DIC will begin scrolling through the languages in their particular language. English will be in English, Francais will be in French, and Espanol will be in Spanish. When you see the language that you would like, release both buttons. The DIC will then display the information in the language you chose.
You can also scroll through the different languages by pressing and holding the trip reset stem for four seconds, as long as you are in the odometer mode.

Dec 31, 2010 | 2006 Chevrolet Trailblazer

2 Answers

I JUST CHANGED THE OIL ON MY 2006 COBALT AND THE READ OUT STILL SHOWS 25% ,MY QUESTION IS HOW DO I RESET THIS .THANKS


Try this and if it does not work let me know.

1. Turn the ignition key to the "Run" position but do not start the engine.

2. Press the display button until the display reads "Oil Life"

3. Press the accelerator (gas) pedal all the way down and all the way back up 3 times within 5 seconds.

4. The oil life index should reset to 100 or the display will read "Oil Life Index Resetting", and when completed then turn off the ignition.

Start the vehicle and verify that the oil life has been reset, and if it did not reset then repeat the procedure, because sometimes it will take more than one try to clear and reset the oil life index.


If that does not work then try this procedure...


1. Press the fuel information button until ENGINE OIL LIFE appears on the Driver Information Center (DIC).

2. Press and hold the select button.

3. The engine oil life percentage will return to 100.

4. Turn the key to OFF.

5. If the CHANGE ENGINE OIL message comes back on when you start your vehicle, the engine oil life system has not reset.
Repeat the procedure.

Sep 26, 2010 | 2006 Chevrolet Cobalt

1 Answer

What does a c on the dic mean?


Your vehicle has a Driver Information Center (DIC).
All messages will appear in the DIC display located
below the speedometer in the instrument panel cluster.
The DIC buttons are located on the instrument panel,
to the left of the instrument panel cluster.
The DIC comes on when the ignition is on. After a short
delay, the DIC will display the information that was
last displayed before the engine was turned off.
The DIC displays trip, fuel, and vehicle system
information, and warning messages if a system problem
is detected. The bottom line of the DIC shows the
shift lever position indicator. See Automatic
Transmission Operation on page 3-23
for more
information.
If your vehicle’s DIC has these features, the compass
direction and the outside air temperature may also
display on the DIC when viewing the trip and fuel
information. The compass direction appears on the top
right corner of the DIC display. The outside air
temperature automatically appears in the bottom right
corner of the DIC display. If there is a problem with the
system that controls the temperature display, the
numbers will be replaced with dashes. If this occurs,
have the vehicle serviced by your dealer/retailer.
The DIC also allows some features to be customized.
See DIC Vehicle Customization on page 4-66 for
more information.
DIC

Sep 05, 2010 | 2002 Buick Rendezvous

1 Answer

How to reset 2005 humer h2 oil life after oil change to show 100% ?


1. Turn the ignition to RUN with the engine OFF.
2. Press and release the reset button in the driver information center (DIC) until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear on the DIC display, press and hold the reset stem until several beeps sound. This confirms the OIL LIFE system has been reset.
4. Turn the key to lock. If the CHANGE OIL message comes back on when you start the engine, the ENGINE OIL LIFE system has not reset. Repeat the procedure
__________________

Nov 21, 2009 | 2007 Cadillac CTS 3.6L

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

84621 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...