SOURCE: DOOR WON'T OPEN FROM INSIDE OF NISSAN ALTIMA 2002 ON DRIVER'S SIDE
There is a cable that attaches to the inside door latch release handle. The plastic that retains this cable is most likely broken. I have seen this before. If the retainer is not holding the cable sheath correctly, the entire cable moves when the handle is pulled and does not release the door latch.
Remove the door panel and inspect this cable. You will see 2 cables (one is for the door lock). If the plastic is broken, you will need a new interior handle assembly.
Hope this is helpful!!
Nissan Scope Technician- 10+ years experience in Nissan dealership
SOURCE: 99 gmc suburban driver side door will not open from inside
My son and I both have 99 suburbans. We both had exactly the same issue. We found the the latch or handle inside the cab on the drivers side had broken off inside the door. Not a big deal. Go to a site called " Parts Train". You can buy virtually any part for your truck there. Get a new inside door handle, pull the panel and replace it. Not an easy job to getting door panel off or back on, but I guarantee this is the problem. You won't have a problem with the passenger side because it is used less. At Parts Train make sure you order the same color as your old one. Take your time and do a good job and you will have your fix.
SOURCE: driver's side door latch wont open door from inside
Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.
SOURCE: I went to open the driver side door and the
the door handle is either broke or a part of it has slipped loose, either way, you'll have to remove the inner door panel to get to it, this is not difficult, a few screws and the panel is retained by push in type plugs that can be pryed loose. the entire door latch assy is held in by screws and is serviced by replacement, the difficulty come with very tight area to work in, and is irritating and time consuming, if you are not good with tools i'd suggest a good mechanic or body shop. always get a quote!!
SOURCE: I have a '93 Buick Regal Custom. Last year I was
I have this problem every year with my car, 1993 buick regal custom, 3.8. What happens is it gets cold, warms up a bit, and ice or snow melts and gets in the door, then it gets cold again and it freezes. I go to unlock and open the door from the outside and this problem arises.
There is a vertical rod on the left side of the drivers side, right side of the passenger side, that gets bent, from trying to open the door when that mechanism is frozen up. Just bend it back, a TINY bit and it will start working.
I got tired of taking my door apart every time it happened so i cut a little "door" in the cover thing, so i can get at that bar.
I also tried coating it in grease and that seems to lessen the frequency.
29 views
Usually answered in minutes!
×